Question about 2001 Kia Rio

1 Answer

Car not starting

Recently I changed the timing belt, clutch plates and pressure plates and the alternator. two days ago it appear this issue.
car starting , engine shaking cannot give gas then after little while engine get shut. now even plugs doesn't get the current not even starting.
what should be the issue

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 36 Answers

The plugs are givin current through the cam sensor

Posted on Jul 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cluth is making a loud screeching noise when changing gear and when starting the car up.


Is it squeeling or a sound like metal to metal as if it squeels, then perhaps your alternator is getting bad or your serp belt, if its the other than perhaps your clutch maybe going start with the clutch flywheel hope that helps

Apr 27, 2016 | Cars & Trucks

2 Answers

Hard to get my car in first or second gear,and reverse crunches,even when driving for a while it's really hard to change gears,what could be the problem ?


if it has a hydraulic clutch ,the problem is a failing clutch slave cylinder not holding pressure
the leak is probably from the slave cylinder
the indications are that the clutch pressure plate is not properly clearing the clutch plate and the drag is causing the problems

Oct 14, 2015 | Cars & Trucks

1 Answer

Recently replaced Serpintine belt. Truck squeals


If your truck has a fan clutch check to see if it is good.

Feb 10, 2014 | 1998 Dodge Dakota

1 Answer

Kia rio squeaky belt burning rubber smell


He is most likely talking about the idler pulley.

Feb 10, 2014 | 2003 Kia Rio

1 Answer

Car has no power.


Remove transmission and check the clutch slave cylinder for leakage. Check fluid level and bleed if necessary. Remove clutch, pocket bearing, throwout bearing and pressure plate. Check for leakage from rear engine seal and front transmission seal. Remove and replace seal(s) if traces of oil are present. Check clutch for oil film and excessive wear, damaged or worn pressure plate (if close to tollerence, replace for convenience). Replace clutch components as necessary and reassemble using your manual for guidance. This should take care of the problem. I see you have changed your fuel filter and given a basic tune up so you should be good to go at that point (check compression and distributor timing) If timing belt has not been replaced around 60,000 then replace or you may end up on the side of the road. if any further questions let me know.

May 16, 2010 | 1988 Toyota Corolla 4 Door

1 Answer

Hi, i am using a Honda Civik EK3 1996, recently i changed Clutch / Pressure plate and timing belt, But now i am getting a Grinding sound (very noisy grinding sound like TV channel is not tuned ... ) when...


You may have to do some testing...if it is coming from the belts, start disconnecting them, don't drive the car since you will loose the power steering, but see if the noise still exists. Then if it does, is it coming from around the timing belt area, which brings me to my next question, has the timing belt been changed? Even if it isn't the area of noise; it needs to be done, and the water pump has to be replaced at the same time...location of the grinding noise is important in order to diagnose properly.

Oct 27, 2009 | 2004 Audi TT

1 Answer

Hi, peugeot 206 clutch/engine problem..


It seems like the clutch pressure plate has given in. Best would be to replace the clutch pro-kit.( Clutch pressure plate, clutch plate and release bearing)

Sep 03, 2009 | 2005 Peugeot 405

1 Answer

Clutch problem. Clutch is up high in the morning when I first start out. After about 5 - 10 miles it goes closer to the bottom until I can't shift out of gear or it stalls when I stop with the pedal all...


could possibly be the clutch pressure plate a car with this many miles on it could hurt to change the clutch in the car anyway probably has only had it changed once since it was new it about time for another one i have seen a bad master cylinder right out of the box before bled it out off the car once put on car would not work

Aug 27, 2009 | 1987 Acura Legend

1 Answer

ELECTRICAL ISSUES


have ya checked the belt for proper tension, controls the alt an the ac compressor

Aug 05, 2009 | 2003 GMC Envoy

1 Answer

1997 XE pickup - clutch frequently "groans"


hi
Its your clutch release bearing.
change the clutch
3 piece clutch kit. (pressure plate + clutch plate and release bearing)
your problem will be fixed.
hope that helps

Jul 19, 2017 | 1997 Nissan Pickup

Not finding what you are looking for?
2001 Kia Rio Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...