Question about 1991 Isuzu Rodeo

1 Answer

1991 rodeo starts chugging after engine has warmed up and driven 20 to 30 minutes - usually recovers but sometimes engine completely dies and can usually be restarted

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 108 Answers

Mine had a similar issue. You might try changing the ignition control module in the distributor. I changed out several parts because every place that checked it said it was good. But I decided to change it and it ran fine afterwards. It should only cost around $30 for a basic unit, unless you have a shop install it. But it does sound like its something that's on the engine and has trouble operating when it gets hot.

Posted on Jul 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chugging while driving


tune-up, dirty gas, dirty air filter...when last completed?

Mar 02, 2014 | 1994 Isuzu Rodeo

1 Answer

Engine sputters and sometimes dies.


As for the engine, try replacing the fuel pressure regulator. If it accelerates good but when you decelerate it dies, it's the FPR.

Nov 30, 2013 | 1991 Chevrolet C/K 2500

1 Answer

After my 2004 Rodeo has warmed up, if I idle for more than a minute or 2, I can hear some kind of motor kick in (I assume it is thermostatically controlled) and then the Check Engine light starts blinking....


The humming motor you hear?
Is it the fan on the radiator?
Is the engine temperature hot?
If it is the fan on the radiator I would suspect you have a faulty engine coolant temperature sensor!
Regards Andrew Porrelli

Dec 03, 2009 | 2004 Isuzu Rodeo

1 Answer

1990 cadillac deville ( service engine soon) light comes and goes


with ignition ON, push the OFF and WARM buttons togethend release. on your A/C control panel. Hold for 5 sec and stored codes should show. Codes should reflect upon problem you are experienceing. Hope this helps.

Apr 07, 2009 | 1990 Cadillac Deville

1 Answer

1991 Mazda truck starts, then dies unless


Not a solution but i am going through the exact same nightmare and same symptoms with my 1991 mazda b2200. I've apwnt over two grand to have my rebuilt TWICE and my alternator replaced and still does the same thing just starts only to die 2 seconds or so later unless i let it warm up to its max but will still die when taking turns and stopping at lights.

Mar 23, 2009 | 1991 Mazda B-Series

1 Answer

Loosing power at cruising speed


Hi. I have two Dynasty LE cars, (a 91 and a 93). Both have the 3.3 litre. The 1991 had almost the same problem as yours except it would only do it once the engine warmed up, (similar to your freeway issue, given distance and time for the engine to warm up to operating temp.) I had it in about three shops before the dealer found an intermittent fault with the cam and crank sensors. I replaced them and now it runs just fine. I hope this helps.

Sep 08, 2008 | 1989 Dodge Dynasty

Not finding what you are looking for?
1991 Isuzu Rodeo Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

80637 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14417 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...