Question about 1999 Dodge Intrepid

1 Answer

Dodge intrepid 1997 3.5 engine code p0320

It will not start.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 117 Answers

This means there is no crank reference at the pcm the crank sensor is a common problem with that vehicle but I would be sure to check for bad wiring or lose connection from the crank sensor to the pcm also the. If no problem with the wiring and the crank senor test bad then change it. The dealer would recommend also changing the cam sensor as well but I have just replaced the crank sensor and fixed with no probs(if the wiring has not been damaged have seen that before mainly where the wiring can rub at the crank near the bottom

Posted on Jul 04, 2009

  • carl Jul 04, 2009

    Forgot to mention be sure if you replace the crank sensor buy it from the dealer, also a couple other things that might effect this is timing belt, or tone ring



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2000 Dodge Intrepid, error codes P1684 and P0320. starter turns over, motor turns but does not fire

The first code is nothing major to worry about. It's just a general warning that some electronics may flag up as a fault as they had no power supply.
The second code needs looking at as the vehicle's ECU, (it's brain), is getting confused signals from the engine sensors. As a result it's staying in a Safe Mode. A good auto electrician should be able to sort out both problems.
The codes translate too...
P1684 = The battery has been disconnected within the last 50 starts.
P0320 = Crankshaft position (CKP) sensor/engine speed (RPM) sensor - circuit malfunction

Jun 18, 2018 | Dodge Cars & Trucks

1 Answer

I have a 1999 dodge intrepid 3.2l with p0320 and no start issue I replaced crank sensor and it did not fix it I need a wiring diagram to ck for broken wire or shorted

U can google it but if that does not the trick U will have to get the service manual. Just make sure the service manual has what you need since some service manuals do not show electrical schematics and they only appear in electrical service manual as in the Toyota Celica

Sep 03, 2015 | 1999 Dodge Intrepid

1 Answer

I have a problem with my 1997 dodge intrepid, engine controlr. fuse keeps blowing every time i try to start it. where do i start troubleshooting?

check wiring at the starter for any grounded out wires from their trace to starter relay and then move foward

Aug 29, 2012 | 1997 Dodge Intrepid

1 Answer


I found your solution (with pics) at:

However, will expect you to register (free) to access their repair guide database.
Note: The Intrepid 3.5L engine takes the Delco starter, while the Intrepid 3.3L engine takes the
Nippondenso starter.
How can you tell which engine's in your Intrepid? read 8th digit of the VIN code.
VIN code "F" - 3.5L 6cyl MFI (multi-port fuel injection) - 60% of 1997 Dodge Intrepids sold
VIN code "T" - 3.3L 6cyl MFI - 40% of 1997 Dodge Intrepids sold

Oct 25, 2010 | 1997 Dodge Intrepid

1 Answer

1997 dodge intrepid 3.5

Transmission control solinoid. Trouble code should give you the awnser.

Mar 15, 2010 | 1997 Dodge Intrepid

1 Answer

Transmission issues

Try to get a diagnostic done first ,usually it is an electrical problem.

Mar 07, 2010 | 1997 Dodge Intrepid

1 Answer

Engine shakes

You need to check for codes first. However,you can visually inspect the spark plug wires.

Jul 15, 2009 | 1997 Dodge Intrepid

2 Answers

My enginwe light is on on my 1997 dodge intrepid the oil is ok water temp ok what can i chec ?

take your car to a Autozone and have them pull your engine codes. maybe time for a tuneup.

Jan 10, 2009 | 1997 Dodge Intrepid

1 Answer

1997 Intrepid sport check engine codes

chrysler codes are counted by flashes followed by a pause between codes..what you have is a code 12-start codes, code 33-AC relay circuit ope or shorted, code 24-throttle position sensor voltage too high or too low, code23-a problen with your air tempature sensor, code 55-end of codes. Next time call any parts dealer, napa,autozone, etc. they will be glad to help you..

Nov 11, 2008 | 1997 Dodge Intrepid

Not finding what you are looking for?
1999 Dodge Intrepid Logo

552 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides