Need intake manifold and fuel rail torque specs

Intake Manifold Torque specs? - Maxima Forums

https://maxima.org > 4th-generation-maxima-1995-1999
Jan 25, 2017 - What do you torque the intake manifold to? ... My haynes manual says to torque the upper manifold bolts to 13-16 ft/lbs ... Supporting Maxima.org Member.
valve cover and intake plenum bolt torque specs - Maxima ...
Mar 19, 2020
Valve Cover Torque Spec. - Maxima Forums
Oct 31, 2004
2000 upper intake manifold collector removal - Maxima Forums
Jan 25, 2017
01 Maxima - harmonic balancer bolt torque spec please
Aug 9, 2015
More results from maxima.org

VIDEOS as well

https://www.google.com/search?q=Intake+manifold+torque+specs+for+2013+maxima

..

Maximum Free Flow Rate (gph):54.2 Maximum Pressure Range (psi):109 Minimum Free Flow Rate (gph):44.9 Minimum Pressure Range (psi):80.Here's a repair manual at a good price. SUZUKI GRAND VITARA 1999 2000 2001 2002 2003 2004 2005 SERVICE REPAIR FSM...

Lower Intake:

1. Use a skin coat of RTV silicone on both sides of the water passage ports (outer most holes) and put the new lower intake gaskets into place
2. Hand tighten the 13mm head intake bolts and Torque the bolts , starting from the center and working your way out in a circular pattern
3. Torque these bolts in a few small increments until they have reached 250 inch pounds of torque.
4. Upper Intake Plenum:
5. When installing the intake air plenum , be sure to catch the four center bolts and the two side bolts (stiffener brackets) before tightening , The center bolts should be torqued to 250 inch pounds .The fuel rail bolts should be torqued to 100 inch pounds

wow, no year stated, and is 1st question, on all books and online sold.



I guess, you work FSM free????? no books , no online alldata.com account, or even this.?



here ill guess for you, 2005?

https://suzukipitstopplus.com/Products/10046-2005-grand-vitara-grand-vitara-xl-7-service-manual-sq625-gv-ja627-xl7.aspx



4 bucks and not only the torque but how not to muff up the cam timing

and many other special instructions, do so and maybe win.

alldata.com
log in , read
or the fsm
$4 bucks a day or?
RTM?

https://suzukipitstopplus.com/Products/1191-2001-vitara-grand-vitara-service-manual.aspx

read the manual. its there all day long.

2.4Liters? 4 banger?
2.4 L VVT J24B 16v 169 hp I4
obscure, and not too many bad ones yet,,,,,,
alldata.com ?
mitchels?
http://www.ebay.com/itm/SUZUKI-GRAND-VITARA-2006-2009-FACTORY-SERVICE-REPAIR-WORKSHOP-SHOP-MANUAL-/231094320081?pt=Motors_Manuals_Literature&vxp=mtr&hash=item35ce4b7bd1
did you check to see if these are TTY, (torque to yield bolts?)

id get a real FSM on this car, while they are still around.
Chapter 11 and all that, and Canada exit, by 2014

how about the other bolts related, and Sequence?
good luck on build.

Hi the torque spec for this fuel rail/manifold is 9-11lb/ft. Here is pic of the sequence.

Check out this link for your answers:

http://www.autozone.com/autozone/repairguides/Suzuki-Vitara-Grand-Vitara-XL7-2000-06/Specifications/Torque-Specifications/_/P-0996b43f8037c5e2

(step 1 ) the torque specs for the heads are---1998 through 2001 are 37 foot lbs. ( step 2) rotate an additional 90-degrees (1/4 turn). intake manifold bolts ( lower ) step 1-- 62 in-lbs, step 2--115 in-lbs. intake manifold bolts/studs ( upper ) 18 ft-lbs. this is for the 3.1 v-6, have a good day!

If it's a fuel injected motor u coukd add better software
Can also flow and port the head
Will get at least 10% overall increase