Question about 1998 Plymouth Grand Voyager

1 Answer

I am trying to find the wiring connector in the rear for hooking up lights for pulling a trailer. any ideas where it is located at on 98 plymouth grand voyager se?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 6,674 Answers

Depends on what you have for an adapter. If it's sort of like a "T" shape with 4 pin connector coming out side, then you should be able to find spot to adapt it, somewhere between rear bumper & rear wheels, along frame area usually. If all you have is a flat 4 connector, with wires, then easiest way is to remove rear corner trim panel behind taillight on drivers side, and splice/wire it in there to harness.

Posted on Jul 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bought a 1998 nissan frontier. Tried to hook up a trailer to it but no plug was found to plug up the trailer. I went and bought a 4 wire plug and wired it up with wire colors all matching up. Plug up to...


Do you have it hooked up to the ball when you are testing? 4 Leads covers L+R turn (2) Brake (1) and Running lights. You don't have a ground.

Jul 14, 2014 | Cars & Trucks

1 Answer

Ford f350 wiring diagram


Need your model year to look up the diagram, please.

Jun 05, 2017 | Cars & Trucks

1 Answer

Wiring diagram


Hook up the trailer to the vehicle. Under the rear bumper you will find a thick wire harness that runs from left to right or vica versa. Choose a location to strip open the harness to gain access to the different color wires. Open the trailer coupling. remove all wires and split them apart. Now start with say the right indicator light on the vehicle. Earth should be established via the grounding method of the trailer hook steel on steel of the vehicle. Connect any wire of the trailer to the now flashing right indicator light. Go through them all till the right indicator bulb flashes on the trailer. A good approach to determine which wire is active, is to make a test light from an old bulb connector some have already two wires connected ie; pos neg. neg the tester onto any part of the vehicle chassis and the pos to the now live wire. Go through them all till all wires meet up. Now go on and extend the harness by means of soldering properly and insulating that wire from the main harness to the female fitting of the trailer connector. At each connection on the fitting fit on properly the different wires and do the same to the male connector from the trailer so that all lines up inside the two connectors. Good luck

Aug 14, 2013 | 1993 Land Rover Defender

1 Answer

2000 GMC SIERRA Pickup---- Has been equiped to tow trailer. Brake lights in rear of truck and on cab does not work when brake pedal is depressed. They work though when you throw the lever on electric...


Disconnect the trailer wiring and recheck the vehicle lighting. If it returns to normal, then obviously the trailer is the problem. Quite often the trailer plug loses its independent ground and it will back feed thru other circuits trying to locate one. Especially if its a boat trailer, water intrusion can cause havoc on the grounds due to corrosion. The under hood electrical center has circuits intentionally meant to be used for trailers. You CANNOT just jumper into the rear lights of the truck (tail, signals and brakes coming from the tail light connector). Because it uses a multi-function switch, the brakes and signals are actually the same circuit, and have to be wired separately for a trailer plug to operate.

Mar 01, 2011 | 2000 GMC Sierra

2 Answers

Tail light wiring connectors and wiring diagram


A test light checking each connector would be faster and easier to do. Maybe somebody may have a illustration for you but by far a simple test light is all you need with a helper turning on the different lights as you check them out and writing all your findings down

Jan 22, 2010 | 1997 Ford F350 Crew Cab

1 Answer

Need wiring diagram for 2001 dodge dakota... trying to hook up connector for towing


moz-screenshot-1.jpg 08-33-93f1.gif CAV CIRCUIT FUNCTION 1 Z13 12BK GROUND 2 B40 12LB TRAILER ELECTRIC BRAKE OUTPUT 3 L76 12BK/OR TAIL LIGHT (Trailer Tow Relay in PDC) 4 A6 12RD/TN* FUSED B(+) (40A, Always Hot, F8 in PDC) 5 L63 16DG/RD LEFT REAR TURN SIGNAL TRAILER TOW 6 L62 16BR/PK RIGHT REAR TURN SIGNAL CONNECTOR 7 L1 16VT/BK BACK-UP LAMP FIGURE 1: 7-Terminal Trailer Tow Connector

Jul 10, 2009 | 2001 Dodge Dakota

1 Answer

Can't find location for trailer elect hook-up


there is no factory connector you must tap into the existing wiring for brake, turn signals, tail and running lights, they make special adapters to "piggy back" into these wiries, U-Haul trailer rental can do (install and sell) this kit for u very cheap.

Jun 29, 2009 | 1998 Dodge Dakota

1 Answer

Need wire diagram to hook up trailer lights, truck not factory equipped w/harness,


I'm assuming you're just going to splice into the tail light wiring so that's what these wire colors are:
at the tail lamp 3 way connector:
black and yellow = park lamp
dark green and brown = left turn signal
there should be another connector with violet and black wire for reverse lights.
the stop lights are turned on through the turn signal circuits.

Apr 12, 2009 | Dodge Dakota Cars & Trucks

Not finding what you are looking for?
1998 Plymouth Grand Voyager Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...