Question about Cars & Trucks
5.8 engine i need to know what size transmission
Get the VIN and go to a Ford dealer. They can look it up and tell you all the details. It's also possible to do an internet search with the VIN but you may have to pay for the resiults.
Posted on Sep 13, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
is the model with the V6 mazda motor, if so it can be a bit difficult if you have little mechanical experience, but it is doable without removing the motor or transmission. we would allow 3 hours to complete the whole job.
Posted on Dec 23, 2008
There are two engine possibilities on a '96 model: a 4.0L v6 160hp or a 4.9L V8 210hp and either a 4-speed auto with overdrive or 5-sp manual. Both transmissions were available with either engine. There were no diesel options on the '96.
What's fitted depends on which exact model he has.
But it's obvious to him whether he has an auto or manual shift and if it doesn't say V8 or V6 on the engine then just count the spark plug wires: V8 will have eight of them (nine if you include the coil wire) and the V6 has six (or seven, as before). A picture of the V6 engine is at http://img74.imageshack.us/i/xpic2sn4.jpg/#q=1996%20Ford%20Explorer
Hope this has helped. If so please return the favour and rate my answer, and if you actually meant what are the physical dimensions of the engine and transmission then let me know which engine and which 'box and I'll come back to you.
Posted on Oct 20, 2009
For 1993 Ford Truck Ranger 4WD 3.0L MFI 6cyl the Control Module-Ignition is located under hood, center, rear engine area, mounted on distributor.
Fig. 1: View of the remote mounted Ignition Control Module (ICM)
Hope this help (remember comment and rated this).
Posted on Jul 27, 2010
SOURCE: I have a 1993 Ford
well my friend, if your transmission is slipping and your wondering what parts your gonna need, wow, how do I say this without sounding cruel...... your most likely going to need a transmission specialist or a mechanic that knows transmissions too. I say this with respect cause if your transmission is slipping and you've checked the fluid levels and/or had it serviced and the problem is still there, your going to have to drop that ****** out and open it up and if you have never done that before, let me tell you from experience, is a very very intricate and scary task. If you havent had a recent service, why dont you start there. You will need a drain pan, a few tools, a new tranny filter, a new tranny pan gasket, and tranny fluid to spec. start with that and see if that doesnt help.
Posted on Feb 26, 2011
Tips for a great answer:
Nov 25, 2014 | 1993 Geo Metro
Jun 06, 2013 | 1993 Ford Tempo
Jun 03, 2012 | 1996 Ford Bronco
Jun 13, 2011 | 1993 Ford Festiva
Mar 02, 2010 | 1993 Ford Crown Victoria
Jan 20, 2010 | 1993 Ford Taurus
Dec 30, 2009 | 1990 Ford F150
Jul 18, 2019 | Cars & Trucks
37 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: