Question about 1998 Oldsmobile Bravada

1 Answer

How do i replace the brake pads on a 98 oldsmobile bravada

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Wow looking over your posts it sounds like you need a haynes or chiltons book if you plan on working on the 4 wheel drive you better have both.The brakes are fairly easy but you will probably need a set of allen wrenches that goes on a 3/8 s drive ratcheting wrench this allows you to get alot of torq on those 2 allens on the back side.i would also lift the whole front end up so that you can freely turn the wheels its tight under there.

Posted on Jul 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced the brake pads on the rear of my 1999 Olds Bravada. We didn't bleed the brakes because we didn't feel that we had compromised them. Now the brakes are dragging and it seem


Replace the calipers my friend. Corrosion on the caliper pistons is holding the brakes on causing the drag. That rubber boot over the piston doesn't seal from condensation and makes surface rust/corrosion and won't allow the pistons to release all pressure.

Sep 25, 2014 | 1999 Oldsmobile Bravada

1 Answer

Right rear wheel drags, grinds and squeals occassionally


replace brakes the dragging and other noises you are hearing come from metal on metal ..........replace your brake pads

Feb 02, 2013 | 2000 Oldsmobile Bravada

1 Answer

My father is experiencing a squeaking noise coming from the rear left wheel area (only in forward, not in reverse). Could this be a brake pad indicator? He has a 2000 Bravada


It will more than likely be the brake pad indicator as you mentioned. The only other noise would be griding and that would be indicative of a bearig or metal to metal on brakes.

Jan 06, 2011 | 2000 Oldsmobile Bravada

2 Answers

2000 olds bravada rear brakes are draging. changed brake hose's to calupers and the center hose as well. with new brake and rotors still draging not sure what to do next.


I also have this problem on my 2000 Bravada - replaced all rotors and back calipers, brand new brake pads, new system and my rear caliper STILL chewed up a brand new brake pad in one week down to the metal. Checking for an emergency brake issue at this point - if anyone has any suggestions about how to unhook the E Brake, please share!

Jan 13, 2010 | 2000 Oldsmobile Bravada

1 Answer

Sounds like the front brakes are grinding/dragging.


Your pads are worn out and will have to replace the front pads and rotors, this is dangrous as the pads have worn off and you will not have brakes for long get it looked at right away.

Nov 12, 2009 | 2002 Oldsmobile Bravada

1 Answer

Brake change


First remove the tire, then remove two bolts on the in board side of the brake cailpier. remove cailpier, then remove bads. Use a C-clamp to push the brake piston bake in so that you can install the new pads.

May 02, 2009 | 2001 Oldsmobile Bravada

1 Answer

1998 bravada brake problem


If you have not replaced any brake lines or brake calipers, then It sounds like that the brake proportioning valve or the brake master cylinder if defective. If the the brake pedal goes to the floor, the master cylinder is at fault. If not, the proportion valve, which is part of the ABS valve body is defective. Have your local garage check these two components for possible problems.

Jan 11, 2009 | 1998 Oldsmobile Bravada

1 Answer

Truck make noise


Sounds like you need to have your brakes checked, if its a squealing noise its probally the pads.

Jan 10, 2009 | 2000 Oldsmobile Bravada

Not finding what you are looking for?
1998 Oldsmobile Bravada Logo

Related Topics:

347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...