Question about Lincoln Navigator L

1 Answer

Trying to remove 2005 lincoln navigator passenger side mirror

Was able to detach the panel inside behind the mirror and also the two screws at the bottom of the door panel. But still cant access down where the wiring that connects to the mirror is. Not sure how to get the rest of the door panel off without breaking it.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Lincoln Master
  • 1,348 Answers

In the handle,....the power window switch cover plate ,pop it out and check for a screw inside it.there are alot of clips that hold the panel on and you need a clip tool to take them out.
go to the libray and the haynes manual will show the exploded view..

Posted on Jul 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where in the passenger compartment is the fuse box located on a 2001 lincoln navigator


Check at the foot of driver side. On newer models check passenger side. You should find a rectangular panel in the right corner. Remove it to find the fuse box.

There should also be an additional fuse panel located on the drivers side under the hood, in the engine compartment.

See also : How to Replace the Fuses in a Lincoln Navigator | eHow.com

Jul 11, 2009 | 2004 Lincoln Navigator

2 Answers

The rear a/c is making a clicking sound/2003 Lincoln Navigator


you have a bad blend door actuator the clicking sound you hear is the plastic gears inside it slipping the panels covering rear unit can be removed once removed cut a/c on once clicking starts you should be able to tell which one it is they are about the size of a cell phone usually twoo or three screws holding on to air box and one small electrical connector remove and call ford dealership with part# listed on the actuator and purchase new one these are not available aftermarket that i know of

Jul 30, 2010 | 2003 Lincoln Town Car

1 Answer

How to replace Inside Rear View Mirror on 2000


Hello, to replace the rear mirror, try the following:

1. Roll the passenger side door window all the way down. Turn off the ignition and remove the keys.


2. Gently pry the window control panel from the arm rest with the pry tool or screwdriver starting at the bottom of the panel. Flip it over and unplug all the wire harness outlets from it. Set the panel aside.

3. Locate and remove the two panel door plugs near the arm rest concealing the two screws and remove the screws with the Phillips head screwdriver.

4. Remove the door panel retainer plugs along the edge of the door by pressing in the middle of the plug to unlock it and removing the plug.


5. Detach the mounting triangle from the upper inside door panel covering the side-view mirror.

6. Remove the door panel by lifting outward and then upward. Disconnect the speaker wire harness from the underside of the door panel and set the door panel aside.

7. Locate and disconnect the mirror wire harness.

8. Pull back the foam insulation from the inside panel covering the side-view mirror.

9. Unscrew the three mounting nuts from the mirror using the ratchet, extension and a socket. Do not drop the nuts into the door cavity.

10. Pry the mirror gently away from the outside of the door.

11. Install the new mirror and replace the mounting nuts on the mirror studs and tighten with the ratchet, socket, and extension. Plug the mirror wire harness back in. Replace the foam insulation. Replace the mounting triangle.


12. Replace the door panel by reversing the procedure. Start by plugging in the speaker wire first.


Thanks
































Jul 26, 2010 | 2002 Pontiac Grand Prix

2 Answers

How to replace passenger side mirror on 2007 Camry


To remove mirror pry off inside triangle panel(black) which exposes 3 nuts which are removed with socket wrench. Detach wire harness and pull out mirror assembly. To replace insert new mirror screws thru assigned holes and reconnect wire harness and tighten nuts to snug. Push inside triangle panel back into place and you're done! It's that easy.

Dec 04, 2009 | 2007 Toyota Camry

1 Answer

How do I remove the passenger side power mirror on 98 caravan?


If you're lucky, on the inside of the door, will be a triangular panel right behind the mirror that you can pop off. If you're not as lucky and it's one piece or the panel is blocked by the door panel, you'll need to remove the door panel to change it.

On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror onto the door

Oct 28, 2009 | 1998 Dodge Grand Caravan

1 Answer

Passenger side mirror replacement procedures


If its a power mirror there is more thing you will have to remove to get to the wires but if not there is a screw on the corner piece on the inside of the door. just pull the screw out and the bolts (3) that hold the mirror on are behind it. If it power then you will have to remove the door panel to access the wiring to disconnect it

Jun 21, 2009 | Ford Taurus Cars & Trucks

1 Answer

Removing passenger door panel


There is a screw behind the lock rod. Lift door panel straight up to remove

Jun 13, 2009 | 2003 GMC Yukon XL

1 Answer

Replacing burned out turn signal bulb in passenger side mirror.


I'm pretty sure the light is part of the glass. The mirror glass is available seperately. Check Ebay or tascafordparts.com for a discounted part. Or, car-part.com for used one. Page with * is lowest price.

here is 2003 Nav. I don't have 2004. May be similar. please give good rating if this help. Good luck
-----
Removal and Installation
  1. Position the mirror glass to obtain a gap at the top edge of the mirror and carefully pull the top edge of the glass away from the mirror housing.

  1. Disconnect the heated mirror electrical connectors.
47533d6.gif
  1. Remove the exterior mirror motor screws and exterior mirror motor.
    • Disconnect the electrical connectors.
29728ca.gif
  1. To install, reverse the removal procedure.


-------

Mar 29, 2009 | 2004 Lincoln Navigator

1 Answer

Replacing driver's side mirror on Kia Sorento


These instructions are for a 2013 Kia Sorento (Passenger Side Mirror)



1) remove speaker cover on inside door panel:



3_18_2013_2_40_43_pm.jpg
2) Use a small screwdriver to pry it away from the door. Be careful of the paint:
3_18_2013_2_41_45_pm.jpg

3) The panel will expose the 3 main bolts that need to be removed:
3_18_2013_2_43_24_pm.jpg

4) The cable harness needs to be removed this is located behind the door panel. Remove the one screw behind the screw cover:
3_18_2013_2_44_56_pm.jpg3_18_2013_2_45_02_pm.jpg3_18_2013_2_45_08_pm.jpg

Once the one screw is removed it will allow you to move the door panel enough to get to the harness and the 2 bottom bolts.

Here is how the harness looks:



3_18_2013_2_46_36_pm.jpg
Once the harness is removed and the 3 bolts removed the mirror will come out.

Repeat the steps to re install your new mirror.

Dec 25, 2008 | 2004 Kia Sorento

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...