Question about 1989 Nissan Stanza

1 Answer

Am change the the plugs and wires and I for got how the wires go

Posted by on

1 Answer

Measure the wires and compare them all side to side...the longest wire would be placed all the way in the first hole (looking at the engine from the front of the car) and the second longest wire would go in the second hole and then the third and forth wires (left to right)..the shortest wire is your coil wire...it connects in the middle of your distributor cap and then to the coil

Posted on Jul 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 acura 2.2 cl engine light p0302 code


A P0302 is indicating that cylinder # 2 is misfiring...Cylinder # 2 is the second plug counting from the front to rear of engine...Main causes for misfire are: defective spark plug, spark plug wire...When was last time plugs were changed? if it has been awhile I would suggest changing them...Also the spark plug wires should be replaced...Changing one plug and/or one wire isn't a good idea; change them all...Plugs cost two or three dollars apiece and a set of wires around $15...Standard motor products wire set # 4717...Spark plugs; Bosch platinum gaped at .044

Nov 13, 2015 | Acura Cars & Trucks

4 Answers

99 chev. tahoe changed plugs and now im not getting fire to the number 1 plug whats wrong


Loretta,, Occasionally, a spark plug is "bad" right out of the box. But a single new plug and install it in the #1 cylinder. Also, on a 15 year old vehicle, it is likely that the spark plug wire wa damaged removing it in order to replace the plug. Good Luck.

Nov 29, 2014 | 1999 Chevrolet Tahoe

1 Answer

How to change spark plugs and wires on a 1998 Ford F150


Change the coils and the plugs. If you feel any hesitation or skipping its going to be one of the other causing it. Best change them all

Oct 25, 2014 | Ford F-150 Cars & Trucks

1 Answer

Change Plugs and wiring on 2002 Buick Park Avenue?


not sure what you want to know. disconnect the plug wire from the plug one at a time then remove the plug with a 5/8 plug socket, reattach wire then repeat for other cylinders. or you can change the plug wire when you change each plug one at a time so you won`t get the wires crossed.

Aug 17, 2014 | Cars & Trucks

1 Answer

Have 1994 toy. truck with v6, when choke goes off the engine misses


Hey 94 TOY...

When did the problem start? Before you changed the wires and plugs? Or did it start, AFTER you changed the wires and plugs? Did the problem remain the same BEFORE & AFTER you made the changes?

1 - If the TOY ran fair to Okay before you did the work, then you may have done something wrong when you made the cahages. Check for correct plugs and firing order. Check for cross wiring. With engine runing pull one plug wire off each plug one at a time. Each pulled plug wire will slow down the engine. When you pull a plug wire that doesn't react and does not make any change ON or OFF that cylinder Plug.
Then that cylinder is not firing.

2 - Check for spark at that wire. If you do-not have Spark there, But the other wires do... the wire going to that cylinder is BAD.

3 - If you have the correct firing order and spark at all cylinders then the cylinder that did-not change the speed of engine has a compresstion problem. Bad valves, Piston or rings are bad... Major engine work and Major repair bill for the repair job.... GOOD LUCK....

Oct 15, 2012 | 1994 Toyota Pickup

3 Answers

I just changed the spark plugs and now im getting back firing and i cant go over 50 mph


Go back and pull each spark plug wire and put it right back on. There is probably a loose one. This is assuming that you didn't pull all the wires off at once when changing the plugs. If you did, the you put the wires back on in the wrong order. Then, you'll need to find a manual online for the correct wiring order for the plug wires.

If they are on in the right order, you need new plug wires. They don't last forever!

Mar 21, 2011 | 1994 Buick Century

1 Answer

When should you change spark plug wires as well as spark plugs


There is one sure fire way to know if your plug wires are in need of changing. Wait until it is dark outside and crank your car, pop the hood and if the plug wires are bad, you will see them arcing. What that term means is that you will see sparks coming from the plug wires on to the engine itself. When you change the plug wires out, do not skimp and go for the cheap ones, they break down under heat and will not be as conductive as they should be, spend a few more dollars and get the good ones, it will be worth it in the end. If you are changing out the plug wires, you should change out the plugs as well, and you should be good for at least 70k to 100k miles.

Mar 02, 2011 | 1994 Ford Explorer Limited

1 Answer

Changing sparkplugs and wires


Change the plugs and wires one at a time as to not get confused. Purchase a quality set of custom plug wires that will fit perfectly. Put anti-sieze on the plug threads. Put some dielectric grease on the plug connector before snapping the plug wire in place. Route the plug wires exactly as they were originally routed.

Aug 11, 2010 | 2006 Kia Optima

3 Answers

Change my spark plug and wires now my car is running rough


Check to make sure you have not cross the wires and your firing order is off by one wire. 
http://autorepair.about.com/library/firing_orders/bl-fo-8792.htm

Good luck and hope this helps. 

Sep 16, 2009 | 1992 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

723 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...