Question about 1991 GMC C1500

1 Answer

Wiper arms stop halfway

I have a 91 gmc 1500 and the wipers only worked sometimes so i replaced it with a brand new one..the new one works when i want and the delay works but they always stop halfway up the windshield..? any help would be appreciated

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 110 Answers

Check all wiring.

Mine did same (not same car)... turned out to be a bad elec conection.

Posted on Jul 03, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Windshield wipers stopped working

Check the wiper arm motor under the hood. Sometimes its the fuse, Check the circuit breaker for continuity across the terminals If an open circuit is indicated replace the circuit breaker. Also check between the circuit motor and the ground, and check the battery voltage with ignition on (don't start) if it test for voltage good and the motor still don't work its a faulty wiper motor. A used wiper motor will work as well as a new $$$$$$ one.Denton auto salvage 785-437-2223 test all their parts for working condition before shipping and have a 30 day return on them

Jan 02, 2014 | 2004 Dodge Ram 1500

1 Answer

2006 tahoe rear wiper

wiper stalk /switch faulty replace and check fuse

Aug 20, 2012 | GMC Envoy Cars & Trucks

1 Answer

Only one wiper working on 1999 chevy 1500 pick up new body style

Check where the wiper arm bolts onto the mechanism

Its pretty simple, with the bonnet closed follow the wiper arm (the bit the wiper blades fit onto) down to the body.

Normaly there is a little cosmetic cover that just clips over the bolt (its kinda round)

Lift this cover up, sometimes you might need to wedge it with a screw driver.

Check if the bolt isnt loose if it is just tighten it up if it isnt remove the bolt(turn anti clockwise) put a washer on the shaft and fasten the bolt again.

Feb 10, 2011 | 1999 Chevrolet Silverado 1500

1 Answer

How to remove wiper arm 91 gmc sonoma

On the base of the wiper arm there is a lever,using a flat head screw driver pry it outward,then use screw driver to pry on opposite side of where the arm joins the base,to come off even.

Apr 25, 2010 | 1991 GMC Sonoma

1 Answer

Can't move wimdshield wiper arms on 91 ford ranger

Dis connect the transmission from the motor and turn the wiper motor on,then turn it off,when it stops,attach it to the transmission with the wipers in down(rest) position,then it will do right.

Apr 08, 2010 | 1991 Ford Ranger Supercab

1 Answer

My windshield wipers stopped working right after winter storm. the driverside one works only if i pull it halfway up the windshield what do i do to fix this

there are plastic bushings on the end of the wiper arms ...called wiper transmission...most places will tell you they dont sell them...keep looking cause they do.....they only snap in and then press on the arms

Mar 06, 2010 | 1998 Ford Expedition

2 Answers

1990 GMC Sierra 1500 pickup. Windshield wipers, Cruise Control

May want to look at replacing the wiper circuit board.It is located on the firewall adjacent to the wiper motor and has a some what square black cover with 3 torx screws and wireing harness pluged into the side.We had a truck that every time you washed it the wipers would stay on until it dryed out.You can try removing it and spaying it down with contact cleaner just watch the brease on the two contact tips.Well hope this helps.

Feb 05, 2010 | 1990 GMC Sierra

2 Answers

Wipers worked one turn then stopped

may have broken bushing in one of the arms in the wiper linkage, remove the cowl and take a look. most part stores sell replacement bushings start there good luck.

Jan 07, 2010 | Mitsubishi Colt Cars & Trucks

1 Answer

99 Yukon windshield wipers sometimes won t turn on and other time stop after working

We had the same problem and sometimes they wouldn't turn off. The intermittent wipers were random. We replaced the wiper motor. Be sure to get the motor with two balls on the wiper shaft (one for each wiper arm). If you can't find it, you'll have to change the part out on the new motor. Keep the wiper arms in the same location on removal, or it will jam and you'll have to start over.

Jul 14, 2008 | 1999 GMC Yukon

Not finding what you are looking for?
Cars & Trucks Logo

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides