Question about 2000 Honda Accord

1 Answer

I have same problem with mt accord 2000 as yours

To solve this problem I had to replace all clutches in the gearbox. The problem solved for 5monts only and happened again. Maybe the quality of new clutches was not good

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 212 Answers

Yes

Posted on Jul 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car dosent go in reverse easy


which one? moving the car or set the reverse gear?
1. reverse gear? if the gearbox are okay please try changing new clutch plate or set.
2. check gearbox lever connection to your knob rod might loose or something..
hope solve it..

Oct 27, 2013 | Dodge Cars & Trucks

1 Answer

Manual shift is hard to shift. Also don't know how to check gearbox lubricant


Check the gearbox lubricant, good, I recommend Amsoil MT-GL4. But probably you have problems with your clutch, slave, pump or clutch disc, check for leaks on slave located on transmission if you have problems with any of this parts you will get some shift problems.

Oct 29, 2010 | 1999 Volkswagen Jetta

1 Answer

Gearbox engagment


i cant solve this i got the same problem did u ever solve this. i have changed - clutch,slave an master cylinder and the gearbox has been rebuilt

Dec 11, 2009 | 2000 Mini Cooper

1 Answer

GEARBOX


Check the oil level in your gearbox, and check your clutch, for the right setting, it needs adjustment. Did this solve your problem, give us some feedback thru
fix ya or your vote for the solution.

Sep 26, 2009 | 1996 Mitsubishi Galant

1 Answer

Transmission in 85 mercedes 300d shifts fine till it gets to 4th gear...makes a clank noise as it shifts...fluid level is OK...any ideas or suggestions on hoe to solve??


When the transmission-oil level is good and it's only 1 gear and your clutch isn't worn badly (= working normally, not like you can shift without (hardly) clutching), it's probably a bad tension-plate in the gearbox. Solving it means rebuilding the box or getting a replacement, both quite expensive.

Aug 21, 2009 | 1985 Mercedes-Benz 300

1 Answer

1988 honda accord 2 door I need to change clutch


no remove gearbox but you might need to lower subframe to gain access ,use an engine lift to support gearbox or a block and tackle so you can pull it out and not have to lower it

Jan 05, 2009 | 1988 Honda Accord 4 Door

1 Answer

Gearbox


You must use the same year of gearbox, they make small changes all the time, there is a real problem with the transmissions on all Caravan's

Aug 14, 2008 | 2000 Dodge Caravan

2 Answers

Honda accord clutch problem..


The gearbox is that big, funky-shaped lump of metal attached to your engine. It has shafts coming out of it, going to the wheels. I've never heard of a spanner.

Jul 23, 2008 | 1998 Honda Accord

2 Answers

Alfa 156 selespeed fault


hi, it sounds like either your clutch needs replacing or the problem could just be that the gearbox needs oil this is best checking as the gearbox can sieze then this will be expensive to replace.
What you need to do is take it into garage and they will remove a plug on the gearbox with special tool then this tells them if the oil is low as some oil should come out of this lug if not then they will top this up for you hopefully solving your problem,
Having no oil in the gearbox could strip the gears and if its got to bad then these will need replacing but this is in the most severe of cases so hopefully your problem is just that the oil needs filling up so get this done and this will hopefully solve your problem.
If you have any problem then give me a shout or if you have any questions then give me a shout then ill be glad to assist you further.

May 20, 2008 | 2000 Alfa Romeo 156

Not finding what you are looking for?
2000 Honda Accord Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...