Question about 1982 Volvo 240 Series

1 Answer

1982 244 won't start B21F

Engine crank's over but no fire at the plug and no fuel pressure, fuse is good

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 173 Answers

The problem, is more than likely, related to the fuel pump relay, located behind the ashtray.
There are two there, but the culprit is the one on the right!
They are just above the fuses,
But before you eject it, just gently twist l/r while turning and see what happens.

Posted on Jul 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Our 7.5 L 1988 F350 cranks and won't start,


Does the rotor turn when you crank it? If you hold the coil wire close to engine ground, you see the spark jump when you crank it? Did you check proper fuel pressure, use a gage and you have fuel injector pulse?
Any applicable trouble codes?

Apr 15, 2018 | Cars & Trucks

4 Answers

Ive got fuel at the injector rod on my 1994 v8 jeep grand cherokee larado but the car wont start .. this all comes after runnin out of gas. its almost wasnts to but doesnt stay on at times and now won


If you ran out of gas there is a very good chance that the fuel pump relay has blown a fuse or requires a reset. Fuses and relays are in the main fuse box behind battery. When you turn your ignition on to the one setting before the starter engages you should be able to hear the fuel pump running. If it does not then check those fuses. If it does run then there is a good chance that the crank shaft positioning sensor needs replacement.

Oct 12, 2014 | 1994 Jeep Grand Cherokee

1 Answer

Engine cranks but won t start


3 things engine internal explosion need is FIRE,AIR,FUEL.
meaning good tune up, fuel pressure check , air filter
after you probably find your problem to start
For further investigation you need to know if any engine code

Oct 04, 2013 | Chevrolet Monte Carlo Cars & Trucks

1 Answer

I have a 2001 Yukon Denali that won't start. It


You need to make sure that the engine has what an engine needs to run. The obvious ones are fuel and spark. Make sure there is at least 40LBS of fuel pressure at the injector rail when cranking. If so, you will need to make sure the injectors are opening. If you verify that the engine is getting fuel you need to make sure there is fire to the plugs when cranking. If it is getting fuel and spark, you need to make sure there is enough compression for the engine to run. And lastly, if it has everything else it needs to happen at the correct time.

Dec 19, 2017 | 2001 GMC Yukon Denali

1 Answer

I have a 2000 hyundai elantra that does not want to start. When starting the engine the car acts like it wants to start then dies. I have fire at the spark plugs, I do hear the fuel pump running, all my...


engine might be flooded remove spark plugs to see if they are wet with fuel pull fuel pump fuse crank eng over with plugs removssed to push fuel from cylinders dry plugs reinstall hold gas pedal to the floor while cranking untill engine starts

Dec 27, 2010 | 2000 Hyundai Elantra

2 Answers

2000 S10 no start


I'd use a gage and check proper fuel pressure, key on engine off, 60--66 psi with spider fuel system.
Engine cranking did you visually check for spark at the spark plugs? Engine cranking is there a fuel injector pulse?https://s8.postimg.org/50arofh11/fuel_pump.jpg
Click on the link for fuel pump relay, you can check the fuse. At the fuel pump, gray wire is voltage, black is ground.

Apr 15, 2017 | 1997 Chevrolet S-10 Pickup

1 Answer

2004 malibu 4cly engine cranks wont start underhood fuses good fuel pressure 53psi


have you checked to make sure that you are getting fire to the plugs. i believe this is coil over ignition maybe not but pull off of one of the plugs take a plug out and stick in boot and see if they are firing if not it is a ignition control module problem or crank or cam sensor.

Aug 30, 2009 | 2004 Chevrolet Malibu

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...