Question about 1994 Dodge Caravan

2 Answers

My Gauges don't work why? it's a 1994 dodge caravan, 3.0 Liters.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 1 Answer

I had this problem. Try disconnecting the battery and reconnecting. Resets the computer or something. Certainly not an expert but that's what the mechanic told me to do and it worked every time.

Posted on Jul 03, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,129 Answers

The plug for the gauge on the motor may be dirty clean it with solvent or electrical contact cleaner spray pull plug of put on repeat 3-4 times

Posted on Jul 03, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Molson02536
  • 3854 Answers

SOURCE: my gauges don't work, on the instrument panel why?

There is a fuse for the instrument under the dash on the drivers side, if the fuse is good. Then give the dash a hit with your close fist right over the instrument panel, sometimes that brings it back to life. It's common for the wire harness clip on the instrument panel circuit board solder goes bad and need to be re soldered, the heat of the current after a few years will melt the solder and the clip comes loose and needs to be re solder back in place. Just remove the instrument panel from the dash, disconnect the wire harness and remove the circuit board and solder the clip back in place. Good luck and hope this helps. be glad to help. 

Posted on Jul 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2001 Dodge Grand Caravan and all the gauges are not working.


u might have an open wire some where or like what happened to me was the cig lighter plug has a coin or something metal in it or if u have something pluged into the lighter and its bad that could be it

Jun 08, 2012 | 2001 Dodge Grand Caravan

2 Answers

How much oil do i use?


For the 2.4 litre 4.5 quarts plus filter....for the 3.3 & 3.8 litre, 4 quarts plus filter.

Aug 10, 2011 | 2005 Dodge Caravan

1 Answer

Gauges not working but fuses seem to be good ?


Check your main ground wire at the battery, if that is good check the ground wires for the insturment cluster, if that is good it may be the BCM.

Mar 30, 2010 | 1994 Dodge Caravan

1 Answer

The dashboard gauges dont work


check the ground on the computer the wires sometimes come loose and cause this

Oct 17, 2009 | 1991 Dodge Caravan

1 Answer

1997 dodge caravan code p1698. dash gauges don''t work.


why does the dashboard flicker when the RPM's go up, in my 96 dodge caravan?

Sep 05, 2009 | 1997 Dodge Caravan

1 Answer

Gauges and odometer don't work


unfurtanetely the the board is burned out due to moisture on the wiring, you may have to replace the board but keep in mind that the wiring must be dry.

Jul 09, 2009 | 1996 Dodge Caravan

1 Answer

My gauges don't work, on the instrument panel why?it's a 1994 dodge caravan 3.0 Liters, list of things that don't work are speedometer - gas - temperature - kilometers - I never know how much gas I have or...


There is a fuse for the instrument under the dash on the drivers side, if the fuse is good. Then give the dash a hit with your close fist right over the instrument panel, sometimes that brings it back to life. It's common for the wire harness clip on the instrument panel circuit board solder goes bad and need to be re soldered, the heat of the current after a few years will melt the solder and the clip comes loose and needs to be re solder back in place. Just remove the instrument panel from the dash, disconnect the wire harness and remove the circuit board and solder the clip back in place. Good luck and hope this helps. be glad to help. 

Jul 02, 2009 | 1994 Dodge Caravan

2 Answers

Dashboard gauges dont work, 1998 dodge caravan


These vehicles seem to have a problematic short, my grandfather has the same vehicle with the same problem, i found the short under the carpet on the driver side of the vehicle, under the gas pedal, sometimes wires can crack and break.

MIKE

Jun 01, 2009 | 1992 Dodge Caravan

1 Answer

2005 Dodge grand caravan 3.8 liters. Saturday


U may have got some bad gas, also maybe vapor lock.

Apr 27, 2009 | 2005 Dodge Grand Caravan

Not finding what you are looking for?
1994 Dodge Caravan Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...