I have two 2004 honda pilot master keys and I lost the valet key. how can i use the two masters to program my thirs cut valet key
SOURCE: Where to deplicate new master key because dealer didnot give me
Hi, I read your comment,
The key for you Honda Accord use chip ,
If you need an master key or extra key you can go to Honda dealer bacause need to be programed by a tech with computer.
But you have the option to Lock smith lots of them can do if they have the computer to programing and is more cheap than dealer.
I hop this information is good for you.
SOURCE: how to program an additional ignition master switch key
The key, regardless of whether or not it has a chip in it has to be programmed at the dealer. They have to hook the computer to the vehicle to perform this. When you go you will need to take any and all keys that you have for the vehicle. Once you initiate the reprogramming procedure you must do all keys at the same time.
SOURCE: 2000 RX300 with no master key, only valet. Anyone
If you live in UK call this best technician guy. I just asked him and he said he might help so do not hestitate call him right now on +44 (0)7746745696
Regards
SOURCE: Can I program a transponder key for a 1999 Toyota
I HAD TO REPLACE THE COLUMNON A 2001 AVALON BECAUSE THE KEY LOCKED UP NOW IT WONT START BECAUSE IT SAYS IM USING THE WRONG TRANSPONDER KEY HOW DO I REPROGRAM THE SECURITY ANTI THEFT TO ALLOW ME TO START THIS CUSTOMER CAR
SOURCE: Had repairs done, battery was
No, your going to need the master key, can you get a mobil locksmith who can do key alarms.Its more cheaper to have a mobil come to you.
?€¢
The theft deterrent module (TDM)
?€¢
The powertrain control module (PCM)
Important:
?€¢
This procedure is not available on vehicles equipped with EXPORT configured TDMs.
?€¢
When performing the 30-minute relearn procedure, all previously learned keys will be erased from the TDM memory. Additional keys may be learned after performing the relearn procedure.
?€¢
When replacing a TDM with a GM SPO Replacement Part, ensure the procedure to setup a new TDM is performed prior to the 30-Minute Relearn Procedure.
?€¢
A total of 10 master keys or valet keys may be programmed to a single vehicle.
?€¢
This procedure adds keys only. The procedure does not erase previously learned keys.
?€¢
The keys to be learned must duplicate the mechanical cut of the current key.
?€¢
If more than one valet key is to be learned, immediately precede each valet key with a learned master key.
252 views
Usually answered in minutes!
×