Question about 1998 Lincoln Mark VIII

1 Answer

THE SUSPENCION OF MY 95 MARK 8 IS TO FULL

THE SUSPENCION OF MY 95 MARK 8 IS TO FULL

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 106 Answers

It sounds like a leveling switch is bad or out of adjustment

Posted on Aug 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why oil light comes on own my 95 Lin mark 8


Gary take your car up to Advance Auto they can check your oil sending sensor.

Jul 12, 2016 | Cars & Trucks

1 Answer

With #1 cyl at tdc on a 95 ranger 2.3 w/8 plugs in which direction should the pointer mark on the cam shaft be


With #1 at TDC, cam is normally set in valve overlap position, but what is important is that distributor is in firing position for #1 as well.

Jun 21, 2015 | Cars & Trucks

1 Answer

95 Lincoln mark 8 belt diagram


try and google it select images engine size would be helpful

Mar 02, 2013 | Cars & Trucks

1 Answer

Como coloco la banda de distribuicion de un jetta 95 2.0 automatico


Check this procedure...

zjlimited_2001.jpg

Fig. Adjusting the belt tension on a 2.0L 8 valve

  1. Disconnect the negative battery cable and remove the accessory drive belts, crankshaft pulley and the timing belt cover(s).
  2. Temporarily reinstall the crankshaft pulley bolt and turn the crankshaft to TDC of No. 1 piston. The mark on the camshaft sprocket should be aligned with the mark on the inner timing belt cover or the edge of the cylinder head.
  3. With the distributor cap removed, the rotor should be pointing toward the No. 1 mark on the rim of the distributor housing. On 8 valve engines, the notch on the crankshaft pulley should align with the dot on the intermediate shaft sprocket.
  4. Loosen the locknut on the tensioner pulley and turn the tensioner counterclockwise to relieve the tension on the timing belt.
  5. Slide the timing belt from the sprockets.
To install:
  1. Check the alignment of the timing marks. On 16 valve engines, the mark on the tooth should align with the mark on the rear belt cover.
  2. Install the new timing belt and tension the belt so it can be twisted 90 ° at the middle of it's longest section, between the camshaft and intermediate sprockets.
  3. Recheck the alignment of the timing marks and, if correct, turn the engine 2 full revolutions to return to TDC of No. 1 piston. Recheck belt tension and timing marks. Readjust as required. Torque the tensioner nut to 33 ft. lbs. (45 Nm).
  4. Install the belt cover and accessory drive belts.
  5. If the belt is too tight, there will be a growling noise that rises and falls with engine speed.
Hope helps.

Oct 09, 2011 | 1995 Volkswagen Jetta

1 Answer

Where is the relay for the electric cooling fan on my 93 mark 8


the relay is in the VCRM which is a box-looking module located in front of the radiator on the driver side-remove the panel above the headlights, that's where it is. They can be found on ebay (used) for about $50-60 plus shipping, or check Lincoln forum for sale sections, it is a very specific piece of electronic equipment and it serves multiple duties like fuel injection and air conditioning compressor. You can use one out of a 94 or 95 Mark VIII also. I have a couple of spares. with these cars you need them.

Feb 21, 2011 | 1993 Lincoln Mark VIII

1 Answer

I SWAP OUT A 96 MARK 8 ENGINE ,PUT IT IN A 95 THUNDER BIRD THE CAR HAD POWER TURN OVER STRONG THE COIL PACK GET FIRE BUT IT WANT COME OUT THE COILS I CHANGED THE =ECM=CRANK SEN=EDIS SEN. I AM LOST


is your 96 a 4,6 and the 95 is a 5,0 for starters the computer programming is completely different if all connectors are connected make sure the pcm is compatable for the engine swap!!!!

Feb 20, 2011 | 1996 Lincoln Mark VIII

1 Answer

95 lLinclon mark 8 service light said..Check Air Ride


check that air pump is operational and all relays and fuses are okay if so check for leaks in vacuum hoses to air ride suspension

Oct 20, 2009 | 1995 Lincoln Mark VIII

2 Answers

95 Lincoln Mark 8 won't shutoff.


check the ignition switch and if this be the case it is cheaper to find a salvage yard and have the column same as yours and change the whole thing just take the steering column to a lock smith along with the key and they will rekey it to the new column

Jan 25, 2009 | 1995 Lincoln Mark VIII

1 Answer

Check air suspencion light on


just remove the bulb..easiest way..lol

Dec 31, 2008 | 1997 Lincoln Town Car

Not finding what you are looking for?
1998 Lincoln Mark VIII Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

fordexpert

Level 3 Expert

5501 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...