Question about 1999 Dodge Ram

1 Answer

97 ram 1500 4wd will just shift out of o.d. pushing the o.d. button has no effect on it but if you turn the truck off then start it again it will shift fine. no other tranny problems.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

This is one of the first signs of Dodge transmission failure. Hunting between second and third around 45 MPH is another sign. I would drain some of the transmission fluid, and look for foreign particles is the fluid. If it is as I suspect you should change the filter and the fluid immediately. The particles I am expecting you to find will be aluminum from your torque converter, they are not magnetic and will not show on the dipstick.

Posted on Jul 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a '97 Jeep Grand Cherokee Loredo. After


shifter module is going bad sounds like it is in the shifter assembly

Aug 30, 2013 | 2005 Jeep Grand Cherokee

1 Answer

97 dodge ram no spark


then i would replace whats called the hall effect sensor its that black plastic plate you see when you take dist cap off. just pull rotor and lift up the sensor.dist cap is what holds it on.also under the sensor will be a stamped sheet metal piece that looks like the top of a castle wall. make sure its not loose on the shaft.if it is then new dist will be needed

May 09, 2010 | 1997 Dodge Ram 1500 Club Cab

1 Answer

My 97 blazer wont go in gear


the trans receives a signal from a censer that tells it you have applied the break, which allows it to shift. do your break lights turn on when you push on the break?

Feb 21, 2010 | 1997 Chevrolet Blazer

1 Answer

My 97 dodge ram 5.9L does not shift into od it


If this is a 5.9 diesel Clean all the battery terminals, especially clean all the wires on the drivers side battery. Give me feedback if this helps

Feb 16, 2010 | 1997 Dodge Ram 1500 Club Cab

1 Answer

My 97 dogde ram dose not like to shift into 3rd gear unless i take my foot off the gas. i was told I needed to change both solenoids. can I do this myself? Is this the problem?


Your description does not sound like solenoid issue.

I need to know what your vehicle uses for throttle position indication to the trans. IS there a rod from throttle body area to the trans? If so, adjust that to have slightly less effect.

If not, look for vacuum leaks or cracked hoses to trans...

Doc

Sep 19, 2009 | 1998 Dodge Ram 1500 4WD

2 Answers

Wont shift out of park


it is probably a problem with the ignition switch.

Jul 13, 2009 | 1996 Pontiac Grand Am

1 Answer

97 chevy k1500 wil not shift into 4 high, just 4 lo and 2 hi


The motor that drives the transfer case is not working it has to be replaced.

Nov 03, 2017 | Chevrolet Cars & Trucks

1 Answer

97 Ram 1500 over revving until hitting 45 mpm


It sounds more like a cable or linkage sticking, and yes it is transmission related, sort of, just because of the high RPM before shifting. Spray all your cables good with lube, at throttle linkage, and get under and look where cable & linkages are at side of transmission, and spray them good too, and work them back & forth, to try & loosen them up. Truck shut off & in park when under it eh.!
Then work shifter back & forth, gas pedal to floor & up etc, to try & loosen things up. That may just cure your problem.

Apr 25, 2009 | 1997 Dodge Ram 1500 Club Cab

1 Answer

97 dodge ram transmission prob


sound like a tork converter problem or the shift solinoids are faulty or internal damage have it scanned hope this helps

Mar 03, 2009 | 2000 Dodge Durango

Not finding what you are looking for?
1999 Dodge Ram Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...