Question about 1997 Jeep Wrangler

1 Answer

Questions about my 1997 Jeep wrangler. Purchased it used and have already put about 4000k into it. Anyway the problem Im having now is when I put it in 4 wheel drive it wont move forward or backward?? The other problem is for the last year it runs a little hot on the highway. Had the radiator rodded out, water pump replaced and a new thermostat, but still have the problem? Could this be a cracked or warped head?? One last problem the AC blows cold 50% of the time and the other 50% it blows hot air?? Anyway thanks for any ideas

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Have your t case checked out your gears could be f ed my husband has this car i hate it i have replaced just about everything on this car cheep and easey replaced whole brake system for under 100.00 bucks the a/c has always sucked this system has a vauccum problem

Posted on Jul 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i put a mechanical speedometer cable on a 1997 jeep wrangler transmission


I just use an old GPS for a truck that has a bad speedometer.

Aug 31, 2013 | 1997 Jeep Wrangler

1 Answer

1997 wrangler defroster switch light stays on?


google wrangler forums im sure theres at least 10 of them join a few and post youre ques there, and all future questions as well

Feb 04, 2013 | 1997 Jeep Wrangler

1 Answer

Jeep wrangler drive belt diagram 4.0 liter


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1999/make/jeep/model/wrangler/1999_jeep_wrangler_drive_belt_routing_diagram.htm

Nov 06, 2009 | 1999 Jeep Wrangler

1 Answer

Do you have a image of how to put the drive belt back on a jeep wrangle 1997


1997 JEEP WRANGLER - L4 2.5L 150ci GAS FI N P

* Belt Routing Diagram Multiple Accessory, w/o P.S., w/o A.C.
d1a5517.jpg


* Belt Routing Diagram Multiple Accessory, w/P.S., w/o A.C.
911b78b.jpg


* Belt Routing Diagram Multiple Accessory, w/A.C.
1141d64.jpg



1997 JEEP WRANGLER - L6 4.0L 242ci GAS FI N S


* Belt Routing Diagram Multiple Accessory, w/o A.C.
ed6a855.jpg


* Belt Routing Diagram Multiple Accessory, w A.C.
523367e.jpg


For more details, you can visit DAYCO Catalog

I hope help you with this. Good luck (remember rated this help).



Sep 18, 2009 | 1997 Jeep Wrangler

1 Answer

Jeep 1997 Wrangler. Gear shifting very hard


synchronizers are going bad a used trans would be cheaper than a rebuild due to the labor involved

Aug 19, 2009 | 1997 Jeep Wrangler

2 Answers

97 Jeep Wrangler Dash Gauges Arent Operating..everything else ok!


ck the engine to body ground.located back side of engine and srew to firewall.

Jun 01, 2009 | 1997 Jeep Wrangler

1 Answer

Oil gauge goes up and down.


If grounding the dash does not work, try putting a mechanical gauge on it and reading actual oil pressure. Pressure does change while driving, but should not wander. With mechanical gauge, check that running hot at idle (in gear if automatic) pressure should not drop lower than 15psi (I'd rather see 20) High reading should be around 40 -50 but no higher.Low pressure indicates a loss of supply or bad bearing on the crankshaft, high pressure may be caused by sticking pressure relief or restriction in an oil passage.

Apr 19, 2009 | 1997 Jeep Wrangler

2 Answers

Locate the cabin air filter for a 97 jeep wrangler


No cabin filter in a 97 Jeep Wrangler.

Apr 04, 2009 | 1997 Jeep Wrangler

1 Answer

1997 jeep wrangler ignition


if it is a hard click i would look at the starter.

Jan 25, 2009 | 1997 Jeep Wrangler

Not finding what you are looking for?
1997 Jeep Wrangler Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...