Question about 2000 Ford Windstar

1 Answer

2000 Windstar - key fob works for all doors EXCEPT drivers door. Key also doesn't work in drivers door.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

The door locking mechanism and actuators are the most likely issue here. Very unliekly that the key fob is the problem. not sure about he problem with the drivers door lock, could be dirty, damaged or not the original that matches the key. have you tried graphite?

Posted on Jul 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cannot lock drivers door with key fob


If the key fob works then there's the possibility that the lock actuator failed. The door panel would have to be removed to access it in order to replace it.

Jul 12, 2014 | 2001 Ford Windstar

1 Answer

My key fob doesn't lock or unlock the drivers door


Does the key work in the lock cylinder

Jul 12, 2014 | 2001 Ford Windstar

1 Answer

2001 ford windstar mini van all the doors lock except the drivers door. When I hit the lock button on the key fob everything locks but drivers door. What's up with that


One of the four power feeds to the front electronic module could be missing. Check fuses 113, 2, 14, and 11 in the battery junction box.
Another possibility is that the left door lock actuator is defective.

May 23, 2014 | Cars & Trucks

1 Answer

My 2004 Chevy key fob won't unlock the car doors....the lock button works just not the unlock. I replaced battery, try to clean the connections but it still doesn't work. What else can I try?


Open the key fob,behind the plastic pad put smalls aluminum foil
in between the pad and the circuit board of the key fob put separate in each hole close the fob and try

Apr 10, 2014 | 2004 Chevrolet Malibu Maxx

1 Answer

Why would drivers door lock by key fob stop working


do all of the other doors unlock when u push the unlock button twice on the key fob?

Apr 14, 2013 | 2003 Ford Windstar

1 Answer

BMW 2006 320d can only lock/unlock drivers door also lock button inside car doesn't work


Have you tried using the emergency key in the door? and isolating the problem?

Have you checked your fuses?


Emergency key is in the key fob.

Apr 07, 2013 | 2000 BMW 3 Series

1 Answer

I purchased a fob for my ford windstar 02 and i programed it with the 8 times routine except when i open the door it deprograms.


Please check first, connections are correct and tightly. If not then check Battery status,pwer supply is perfact.And check also that any bulb or lamp may have fused or not.

Aug 26, 2012 | 2000 Ford Windstar

1 Answer

Door locks problem with one door drivers door


dont blame the idiot,we all make stupid mistakes without thinking and iam no exception,remove door trim and oil the solonoid with a oil can not a silly sunday mechanic spray and let it soak in as its working but i think its just a bit sticky with wear and dirt ingress hence it locks but doesnt unlock which might need a bit more power,oil the whole lot lock and all

Dec 05, 2008 | 2000 Renault 181

1 Answer

Need programming instructions for RKE for 2000 Mazda 626


2000 Mazda 626
Note: Make SURE the battery is new.
Instructions for programming ONE keyless remote fob.
1. Open the driver’s door & leave open.
2. Insert the key in the ignition.
3. Turn the key to the on and off position 3 times.
4. Remove the key from the ignition.
5. After door open chime stops, press the door open button 3 times.
6. After chime, press any fob key twice.
7. After second chime, press any fob key twice again.
8. After third chime, press any fob key twice again.
9. Press the door open button once.
10. The car should give another acknowledgement chime.
11. Test key fob.
This DOES work. I just programmed mine successfully today, three hours ago.

Sep 03, 2008 | 2000 Mazda 626

Not finding what you are looking for?
2000 Ford Windstar Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...