Question about 2001 Chevrolet Silverado 1500

1 Answer

I have a 6 cylender 4x4 ahen it starts it only runs for a second then stalls.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 75 Answers

This is the v.a.t.s. anti theft system
you might need to replace the resistor in the ign cylinder wait 30 min and try it again

Posted on Jul 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 caddi runs sluggish after checking i found that cylenders 1247 not recieving fuel what can this b


Bad injector or injectors not getting proper lower..noir lights help for this

Sep 09, 2014 | 1998 Cadillac Eldorado

2 Answers

My 96 dodge ram 1500 4x4 with a 5.2 ran great and


Kind of sounds to me like you have an o2 sensor problem.

Aug 07, 2013 | 1998 Dodge Ram 1500 4WD

1 Answer

2005 Ford F150 fuel pump not turning on with ignition and misfiring cylenders


Air in the injector lines #1 and #6? Also if its diesel check the preheating system (plugs/wires/fuses)

I wouldn't recommend continuous use of starter fluid!

Dec 05, 2012 | Cars & Trucks

1 Answer

CODE P0101 AND CODE P0341 i have a 96 chevy blazr 2dr 4x4 4.3L. I RECENTLY HIT A LARGE BUMP AND THE TRUCK STALLED.PULLED OVER AND STARTED IT BACK UP .IT RAN A SECOND OR TWO THEN STALLED AGAIN. IT WASN


Well the code 101 is for the MAF sensor and code 341 is for the cam sensor if equipped.
I'm showing a distributor for that engine so its possible something is going on inside of it.
My first guess would be something in the engine harness that was jarred loose.
You might have to test the circuits at the ECM to see if anything is not making the circuit back to it.
If the engine won't idle and the MAF code is present, you could have a large vac leak somewhere.

Jul 10, 2012 | 1996 Chevrolet Blazer

1 Answer

Need to know which is number 1 cylender


if you are looking at the motor it would be your 4th one back on the right side

Oct 29, 2011 | 1998 Ford F150 Regular Cab

1 Answer

1991 f250 4x4 auto, when hot in florida it stops running, why?


Fuel pump fuel pump, one main reason for a vehicle to stop running as it is warm is the fuel pump and the second reason is the most famous of all the ignition module that is on the distributor as it warms up it can the resistance get greater and effects the ability for the vehicle to maintain spark and you stall out, but when cold you can start up, ignition module or fuel pump both are capable of failing when you reach operating temperature

Apr 27, 2011 | Ford F-250 Cars & Trucks

1 Answer

4x4 6 cylinders manual trans.1995 ford f150 when down shifting and changing gears to slow down a very loud grinding sound but if i pump the cluth and rev up the rpm's sometimes it goes into gear.....


check and make sure your slave cylender is full of fluid, it should be mounted on the firewall, also sounds like you need to bleed the slave cylender.

Dec 03, 2010 | 1995 Ford F150 Styleside Regular Cab

1 Answer

My 91 mazda mpv 4x4 van won't start. we were


than I would have the fuel pressure check and change the fuel filter

Mar 09, 2010 | 1991 Mazda MPV

1 Answer

2002 excursion 4x4 stalls when stopping had fixed


SOUND LIKE THE IDLE AIR CONTROL OR MASS AIR FLOW SENSOR WILL CAUSE VECHICLE TO STALL OUT.ALSO BAD GASOLINE. BAD COILS OR BAD FUEL INJECTOR.STOPPED UP FUEL FILTER.AND A INTAKE LEAK.MANY THINGS CAN CAUSE VECHICLE TO STALL.

Nov 13, 2009 | 2001 Ford Excursion

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...