Question about 2006 Chevrolet Trailblazer

1 Answer

Cadillac Escalade ESV 2005 Sideview Mirrors Not Working

Recurrent problem with sideview mirrors not adjusting. They fold in and out but mirrors point down and can't be adjusted from control inside. Have had reprogrammed numerous times (costly) but problem recurs. Have had modules replaced (costlier) but problem recurs. Have had seat heater module replaced and bypassed (costly) but problem recurs. Cadillac tech support is dumbfounded. What do I need to reprogram on my own as I would rather do that from time to time than to turn it in to Cadillac every time this recurrs? Any thoughts on other solutions??

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,428 Answers

Y ou need to take the inside control system on the door apart .
Clean it with contact cleaner .
The problem is the window is open sometimes and water gets in it corriods the contects.
You could also try spraying electrical contact cleaner on the control buttons may work for a while but the contects need to be cleaned

Posted on Mar 07, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

cadman000
  • 607 Answers

SOURCE: Sideview Mirror Replacement

Try either an open end wrench or 1/4" drive socket, possibly 10 mm or 12 mm ( metric ) . Forget using needlenose pliers. Hope this helps

Posted on May 10, 2009

  • 12104 Answers

SOURCE: How do I replace the mirror insert on the sideview

the mirror sits on a circular clip if u push against the middle it might click into place if not turn mirror all the way in towards the right so u have finger room stick hand behind mirror and pull forward will release keep hold if it if you have heated mirror disconnect the two wires

Posted on Sep 25, 2009

  • 1986 Answers

SOURCE: how to remove the inside door on 2004 Impala to replace side mirr

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

  • 1986 Answers

SOURCE: replace sideview mirror

If you're lucky, on the inside of the door, will be a triangular panel right behind the mirror that you can pop off. If you're not as lucky and it's one piece or the panel is blocked by the door panel, you'll need to remove the door panel to change it.

On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror onto the door

Posted on Nov 09, 2009

  • 4102 Answers

SOURCE: how do i remove and replace sideview mirror in my

hi, what you need to do is pull the plastic casing off on the inside of the car at the back of the mirror you may need to lever this off with long screwdriver it will just pull of giving you access to the bolts holding the mirror to the door.
Just remove the plastic casing inside the car and this will then enable you to get the mirror off.

Let me know how you get on or if you need further assistance ok

Posted on Feb 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power sideview mirrors do not work


Sounds like a blown fuse in owners manual there is a fuse description and where the fuse is located for each power operated device.

Nov 02, 2014 | 2005 Toyota Corolla 1.6

1 Answer

My 2005 Cadillac escalade esv won't shift out of park can someone tell me what could be the problem


Brake Switch or Shifter Solenoid ,are possibles

Have to look at wiring diagrams, to find how those
items work & what is most likely, to need adjusting
or replacing, if it fails a test

Sep 27, 2014 | 2005 Cadillac Escalade Esv

1 Answer

How to remove 1999 Ford Explorer sideview mirrors


REMOVE SIDE COVER MAYBE DOOR PANNEL CAUSE THE POWER WIRE WILL BE HELD ON THE IN SIDE SHOULD BE 3 10 MM BOLTS GOOD LUCK WITH MOROR. I THING IT IS ASSEMBLY

Feb 14, 2013 | 1999 Ford Explorer

1 Answer

Where is the fusebox located for sideview mirrors


Underneath the rear seat near the Battery , you will have to lift the seat up ...

Dec 09, 2010 | 1998 Cadillac DeVille

2 Answers

Need a fuse panel diagram for a 2004 jeep grand cherokee


Grand Cherokee fuses 1999-2004...

c0a8d9f.jpg

For the general descripton can visit this link: wjjeeps.com/fuses

Hope this helps (remember rated and comment this).

Aug 09, 2010 | 2004 Jeep Grand Cherokee

1 Answer

Cant find fuse for clock and sideview mirrors. 97 Luxus ES300


for mirrors power comes from 15A cig fuse
clock runs off 15A CIG and 7.5A PANEL

Feb 05, 2010 | Lexus ES 300 Cars & Trucks

3 Answers

Sideview mirrors dont move certain ways.


I researched the maintenance manual. The fuse you need to replace is fuse 20 in the under dash fuse box. It controls side windows, washer motor, rear view dim function, and possible seat memory. There are a couple that link to the mirrors, but this is the one for this problem.

Jan 24, 2009 | 2004 Acura TL

Not finding what you are looking for?
2006 Chevrolet Trailblazer Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...