Question about 1998 Nissan Sentra

3 Answers

98 Nissan Sentra GXE Blower only works on highest setting?

Why blower inop on 1, 2 & 3? Only blows on 4.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

There is Blower Motor Resistor located at the passenger side, right side at the feet. Mounted by 2 screws. You should be able to see electrical connector going to it. Replaces in minutes.

Posted on Oct 14, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 40 Answers

There is a 24.00 resistor pack that goes on the system it is located by the blower. takes about a minute to replace

Posted on Aug 03, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 101 Answers

Blower setting 4 is max? is has its own resistor and is not ran by the same thing as the setting 1 and 2 and 3. Not sure how to help, but i do know that setting 4 is turned on by something seperate.

Posted on Jul 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace a blower resistor in a 2002 Nissan Sentra GXE?


Right next to the blower motor is the resister beneath the glove box,just remove connector,then 2 screws,can't tell by looking at it if it's bad,here's a link to what it look's like. Duralast Heater Blower Motor Resistor JA1625 2002 Nissan Datsun Sentra...

Sep 12, 2014 | 2002 Nissan Sentra

1 Answer

Sentra AC


There's a 10amp fuse that powers the ac clutch relay and compressor. There are 15amp fuses that power the blower motor and the ac control switch. All of those fuses get power from the key switch. The resistor and fan switch provide the ground circuit for the blower motor.
I would want to know if those fuses are getting power, and if the control panel is working. You should be able to ground the blower motor and make it run on high, and that should not have any effect on if the ac compressor is running or not.
It could be a key switch problem in that the circuit is not strong enough to handle the load from the blower and the compressor at the same time.

Jun 21, 2013 | Cars & Trucks

2 Answers

AC only works on settings 3 & 5


souns like a bad blower resistor.the resistor controls the different speeds.sometimes every speed except the highest will stop working.the blower resistor is almost always near the blower motor.

Sep 03, 2009 | 2004 Chevrolet TrailBlazer

1 Answer

1999 Fan runs only on highest setting


The blower resistor has gone bad and needs to be replaced, it's common for it to burn out due to time. You can pick one up at Auto Zone and they will have the step by step instructions to replacing the resistor. 
The blower motor resistor is under the dash, next to the blower motor. You will need to remove the under dash panel to access it. It is very easy to replace, just two screws hold it in. May take about 15 to 20 min with simple hand tools. 

Good luck and hope this helps. 

Jun 22, 2009 | 1999 Nissan Altima

1 Answer

A/c fan, only works on highest setting


You have a problem with your reostat. This is located under your dash behind the glove box and beside the blower motor. Unplug the plug and take out two screws hold it in place. Take it to your local recycle yard and get a good used one make sure to ask if it was tested and if it has warranty. Please let me know how you make out.
Thank you

Jun 01, 2009 | 1994 Nissan Altima

2 Answers

99 Nissan Altima blower fan works only on highest setting (#4)


Resistor switch. The rotary switch on the dash is very, very uncommon. It is also not the blower, because it works.

Mar 09, 2009 | 1999 Nissan Altima

1 Answer

HVAC Blower functions only at highest (4) switch setting


if the blower works on high then its not a fuse it could be the switch or the resistor that cuts back power for the lower settings

Nov 18, 2008 | 2002 Nissan Altima

Not finding what you are looking for?
1998 Nissan Sentra Logo

685 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

723 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...