Question about 1997 Ford F250 SuperCab
Wont start turns over but no start
You may also want to check crank sensor signal. Unplug crank sensor located by crankshaft pulley and plug back in to see if it starts if it does replace it. Check theft light on instrument cluster located near RPM guage, when you turn key on if it blinks real fast you have a problem in PATS system,you will need to have it seviced at dealer most likely.
Posted on Jul 06, 2009
Battery Discharged or Faulty.
Corroded, Broken, Shorted or Poorly Connected Battery Cable.
Clogged or Dirty Fuel Filter.
Distributor Cap Cracked or Burned.
Coil - Ignition
Faulty Ignition Coil.
Worn, Damaged or Faulty Spark Plug Wire(s).
Incorrectly Gapped or Fouled Spark Plug(s).
Starter Motor Faulty.
Low Fuel Pressure.
Faulty Starter Solenoid Switch.
Relay - Fuel Pumpat
Faulty Fuel Pump Relay.
Fuel Injector Pressure Regulator
Faulty Fuel Injector Pressure Regulator.
Improperly Connected or Faulty Ignition Switch.
Faulty Starter Drive.
Dirty or Worn Fuel Injectors.
Fuel Pump Strainer
Clogged or Dirty Fuel Pump Strainerat.
Engine Control Computer
Incorrect Operating Information Being Delivered and Sent From The EEC.
Fuel Tank Empty.
Carburetor Flooded or Faulty Choke.
Worn, Loose, or Incorrectly Installed Distributor.
Posted on Jul 02, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 11, 2014 | Mercedes-Benz C-Class Cars & Trucks
Apr 14, 2014 | 2000 Ford Taurus
Dec 10, 2010 | 1992 Plymouth Acclaim
Jul 22, 2009 | 1999 Honda Accord
Dec 23, 2008 | 1998 Buick LeSabre
Nov 12, 2008 | 2000 Lincoln LS
739 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: