Question about 2004 Mitsubishi Endeavor

1 Answer

Help..my tire sensor blinks intermittently during hot weather.

All 4 tires are inflated within specs. 32 psi-cold temp. reading/35 psi- hot temp. reading. All 4 new Michelin tires have been driven appx. 600 miles when this started happening. I have an '05 Mitsu/Endeavor. Any help out there from you Gurus would be greatly appreciated. Thank you.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Dont trust the tyre pump when you pump them, up there never right one knock and it puts them out

Posted on Jul 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

00Linc ls tires P235-50R -17 running 40PSI LABEL IN DOOR SPEC 30PSI . Would like to no what to do don't want to damage tire.


because it is a low profile tire with a wide tread , the 30 psi is a recommended pressure for a standard size tire
however at 30 psi you will probably find that it will wear with an under inflated wear pattern and the 40 psi is used to sit the tread flat on the road
best talk with a good tire shop as they have experience and reports form a vast range of customers who talk about the pressures they run to get the best wear from the tires
the tires I run are standard and the recommended pressure is 32 psi but the make of tire actually runs best on 38 psi and that comes from the tire manufacturer

Nov 15, 2015 | Cars & Trucks

1 Answer

Warning light


check the tire pressures..see if any are below 30 psi..in cold weather, they use nitrogen to inflate tires due to its lack of effects from these temperature changes..these new cars will tell you if your tires are either too much pressure or too low.. its a safety feature .. you can put air in them and that light should go out.. try to set them at 32-35 psi..the variance in readings will affect this also by 3-5 psi..in these conditions check once a week or so..remember rubber does not seal entirely on alloy wheels..in some cases where a tire is consistently low, you may need to take it in and have the tire "glued" to the rim..

Dec 23, 2013 | 2007 Mini Cooper S Convertible

1 Answer

I changed 1 of my valve sensor so i need to no how to reset the tpms light


By operating the tire pressure warning reset switch, the tire pressure warning ECU can be set to issue a warning at an inflation pressure that corresponds to the standard pressure of tires .Therefore, you must set the warning threshold to the proper value in order to comply with the local regulations .Operate the tire pressure warning reset switch only after the inflation pressures of all tires have been adjusted on the vehicle.To initialize the system, press and hold the tire pres- sure warning reset switch for 3 seconds or longer with the ignition switch in the ON position. When the system receives the
initialization signal, the warning light blinks 3 times (1 second on, 1 second off). During initialization, the tire pressure warning valve and transmitter measures the inflation pres sure of the tire, and registers the signals that are transmitted into the tire pressure warning ECU at a frequency of once per minute. The initialization process is completed when signals from all the tires have been received. It takes a few minutes .

Tire size Inflation Front Inflation Rear
P 195/65 R15 89S 30 psi 30 psi
195/65 R15 91H

P 205 /55 R16 89H 32 32 psi
P 215/45 R17 87W
205/55 R16 91V

Dec 10, 2013 | 2010 Toyota Corolla 2.0

1 Answer

My 2008 Envoy has the tire sensors that connect to the computer .. I recently had two tires replaced and was having no problems but since the weather has gotten colder when I first start the engine the...


Air pressure in the tires drops when it is cold (as much a 5 PSI), as you drive they heat up and that makes them fall within the correct pressure limits to turn off the low tire pressure warning. I suggest you get an accurate tire gauge and air your tires up to 32 PSI all around.

Dec 13, 2011 | 2008 GMC Envoy

4 Answers

What psi should be in tire's


It all depends on the vehicle you are driving and the tires that are on it. For the most part, you can see what the vehicle manufacturer recommends by checking the tire/vehicle certification label on the driver's door or on the drivers door jamb area. It will tell you the recommended tire size, the maximum load rating and the recommended tire inflation pressure.

Jan 22, 2011 | Chevrolet Blazer Cars & Trucks

2 Answers

Dashboard symbol horseshoe shape w/!...meaning?


I dont know if you are refer to one signal light like this...

2f20c4e.jpg

If this is right, is the Tire Pressure Monitor Sensor (TPMS) o Tire Pressure Monitor Systems (TPMS) are being used on more and more new vehicles. Low tires are potentially dangerous, especially if a vehicle is heavily loaded and traveling at highway speeds during hot weather. A low tire under these conditions is a blowout waiting to happen. The inflation pressure of the tires should be checked regularly, but many motorist do not check their tires. That is why Tire Pressure Monitor Systems are coming into use.

Tires are designed to operate within a certain pressure range. The recommended inflation pressure can usually be found in the vehicle owner's manual and on a decal that may be located in the glove box or door jam. The recommended inflation pressure is designed to give the best combination of ride comfort, load carrying capacity and rolling resistance.


NOTE: The maximum cold inflation pressure on the sidewall of a tire is NOT the recommended inflation pressure. It is a maximum limit for the tire only. The recommended inflation pressure for most passenger car tires is 32 to 34 psi (cold).

Hope helps (rated this).


Jan 11, 2010 | 2001 Volkswagen Beetle

3 Answers

What is the proper tire pressure for winter tires? 205/55/16


do 32/32. the higher the inflation the less traction.

Oct 31, 2009 | 2006 Volkswagen New Beetle

5 Answers

Need tire pressure and cold tire pressure for 2007 saturn aura


Your answer is on the TIRES. There are THOUSANDS of Different tires on the Market, No one can determine the Proper Tire inflation on the Internet.

Jan 19, 2009 | 2007 Saturn Aura XR Sedan

Not finding what you are looking for?
2004 Mitsubishi Endeavor Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...