Question about 1998 Isuzu Amigo

2 Answers

How to replace starter on 1998 isuzu amigo 2wd 4cyl

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Removal
1. Battery ground cable.
2. Remove harness connectors
3. Remove bolts from starter.
Installation
1. Install starter assembly.
2. Install mounting bolts and tighten bolts to specified
torque
Torque: 25 N·m (18 lb ft)
3. Connect harness.
4. Reconnect the battery ground cable

Posted on Jul 12, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Lardon01952 What a FRICKIN Idiotic Answer...

Your answer to the question of Life??!!
Let me guess.
How to *LIVE*:-

Breath IN
Breath OUT.
Eat, ****, Sleep, bathe every once in a while.
Repeat.

Posted on Apr 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 isuzu amigo 2.2L 5sp 2wd new NGK plugs & wires, fuel assembly, rail test, code -cam pos sensor?? still bucks, lurches, can't get 2 4,000 rpm 2 reset pcm, WTF?? 120,000 odo. Help us pls sir.


2.2L gas 2.2-liter petrol (X22SE)
or 2.2L
2.2L (X22se/D) Engine???
there are 3 engines

i cant guess engines yet, "Carnac the mag." is off line.
all i can tell from above is engine misfires.
when did it last run ok,, last week , last year, or found car in a barn.
history matters.
why not connect any $10 to $100 scan tool and scan it
running,,, it will infact ,tell you things, errors,called, DTC errors.
and is key to any diagnose of any modern engine in USA>.
even in canada the tool works starting in 1998.

is cam belt fresh? and timed correctly?
AMIGO, 2.2L (1 of 3)

first learn what under the hood.

please post what 2.2L is there. and fuel type.
gas, diesel ,petrol, ect

Mar 15, 2016 | 1998 Isuzu Amigo

1 Answer

Will the five speed manual in a 1994 isuzu amigo 2wd 2.6 liter fit a 1999 amigo 2wd?


ask a wrecking yard?
they have the hollander data for that. ask them to. check?
http://hollanderinterchange.net/index.php
or you do it. at link above?

define fit,?
fits engine rear. and clutch.
no changes to prop shafts.>?
and fits shifter parts?
a direct swap is best way to say this if true.
no cutting welding or other tricks.
or got to isuzu dot com and see if both transmission have same part numbers.
join an isuzu forum.? they;'d never come here, do to no real formatting here, "eg, no swaps sections here)

Apr 15, 2015 | Isuzu Cars & Trucks

1 Answer

Coolant temp sensor location on 1998 Isuzu Amigo 2.2L 4X4.


Go in on utube and ask the question Where is the 1998 Isuzu amigo coolant temp sensor located good luck

Oct 22, 2014 | 1998 Isuzu Amigo

1 Answer

Cylinder head bolt tightening sequence for isuzu rodeo 1998


1998 Isuzu Truck Rodeo 2WD 2.2L MFI DOHC 4cyl

The Head Bolt Torque

Torque sequence ----------------- front ' 7 3 1 5 9 ' of ' ' engine ' 8 4 2 6 10 ' ----------------- Step 1: torque bolts in sequence to 18 Ft/Lbs Step 2: turn bolts in sequence an additional 90-degrees Step 3: turn bolts in sequence an additional 90-degrees Step 4: turn bolts in sequence an additional 90-degrees recheck final torque in sequence

1998 Isuzu Truck Rodeo 2WD 3.2L MFI DOHC 6cyl

The Head Bolt Torque

Torque sequence -------------- front ' 6 1 3 7 ' of ' ' engine ' 5 2 4 8 ' -------------- Step 1: torque to 20 Ft/Lbs Step 2: torque to 47 Ft/Lbs recheck final torque in sequence

Jan 15, 2013 | 1990 Isuzu Spacecab

1 Answer

How do you convert an automatic transmision to a manual on a 99 amigo


I think you should have done more research before you started this project. The clutch wires you cant find may not exist on your Isuzu. Also the starter wont work without a signal from the clutch interlock switch. These probably also dont exist.

Sep 10, 2012 | 1998 Isuzu Amigo

1 Answer

Sticking engaged starter


Replace the starter relay,it is most likely the problem,if this does not solve the problem,replace the starter.

Dec 21, 2010 | 1998 Isuzu Amigo

2 Answers

1999 Isuzu Amigo V6 2wd: Car doesn't start always. Turn the key, lights come on, radio on, etc, but no clicking noise, no engine trying to turn over, absolutely nothing. I put in a new battery, but same...


When I have such a problem with my Toyota pickup, I install a button in dash to crank the motor over. Hot wire from the switch on to the button, then from the button to the starter activating wire. My Toy doesn't do this every time, but when it won't crank I just reach down and flip the spring center switch, same as a button, and she cranks and fires up. This is easier than replacing a bunch of stuff that may not be bad or is impossible to get to.

May 26, 2017 | 1999 Isuzu Amigo

1 Answer

How do you replace the starter on a 2001 Isuzu Rodeo 4cyl 2WD?


Remove the battery earth cable. Engage parking brake and chock the wheels. The starter is on the lower rear left hand side of the engine. Remove the starter supply cable by undoing the 13mm nut on the rear of the solenoid. Unclip the start wire on the side of the solenoid by squeezing and then pulling the connector plug. Undo the mounting bolt on the top of the starter first. and remove. Then the bottom one. Doing it this way round will make it easier to undo the bolts by hand once loosened.
Pull the starter to the front of the car and remove.

Aug 21, 2010 | 2001 Isuzu Rodeo

2 Answers

How do I replace the camshaft position sensor on an amigo


4cyl? Its behind th timing cover between the cam pulleys. Should take about 15 minutes to replace. loosen upper cover and pull back to expose part

Aug 31, 2009 | 1998 Isuzu Amigo

2 Answers

Won't crank, will push start and runs fine.


make shure your baterie haves abaut 13 amps
then check your starter solenoid make shure that curent is geting there wen you turn the key

Jul 13, 2009 | 2002 Isuzu Rodeo

Not finding what you are looking for?
1998 Isuzu Amigo Logo

Related Topics:

599 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14411 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...