Question about 1996 Dodge Caravan

1 Answer

Elctrical problems in a 1996 grand Caravan

I have a 196 Grand Carvan I had just replaced the B.C.M. modguol and it is programed and every thing it fixed some problems but I still have a few.It has brake lights but not tail lights no blinkers no park lights the intior lights are working but not the dash lights the windsheild wipers are working but having a hard time grounding & all of the grounds that I could find under the hood are funktional and no heater and I keep getting differnt advice it"s driveing me crazy I would realy appricate some tangable answers thanks for taking time to consider my problem god bless

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 53 Answers

I would like to know why the BCM was replace.but the place I would start is the headlamp switch,it turns on the parking and tail lamps and also feeds the cluster. The no heater problem, does the vehicle reach operating temp.which would mean no hot air or do you mean there is no blower motor ?If its there is now blower motor function the first thing is to check the 30amp fuse for the blower motor or if you look under the dash on the passengers side you can find the wiring for the blower it has two wires one green and on black the green wire should light a test light . if you have power there check the black wire for ground (use the black wire as the ground side of your test light .if you have both power and ground then you need a blower motor. Some people will tap the blower motor with a hammerif the motor starts working you have a flat spot in the motor and it should be replaced. Good luck

Posted on Aug 07, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Both my keys FOBs on my 2000 Dodge Grand Caravan don't work, changed the batteries, still did not work. Bought 2 new ones and the dealer could not program them.

Programming a Replacement Keyless Entry Remote ' Filear ...
Oct 17, 2012 - If the transmitters don't work, or if you'd rather not match the transmitters yourself, .... Tried these instructions last night on my 2005 Grand Prix.

Key FOB Not Working - The Chrysler Minivan Fan Club Forums

Mar 15, 2009 - 10 posts - ‎3 authors
Hi Everyone, One of my Key FOB's stopped working. Is there a way of ... Well, to be honest, you don't know where that FOB has been? LOL ... 2009 Dodge Grand CaravanSXT (3.8L), Light Sandstone Metallic, 125K miles 2005 Volvo .... By jimmy154 in forum 3rd Generation Chrysler Minivans: 1996-2000.

Key May Not Start Car or Release From Ignition : Dodge ... > Problems > Dodge > Grand Caravan
Dodge Grand Caravan Key May Not Start Car or Release From Ignition. ... If the newkey doesn't work, replacing the lock cylinder including tumblers ... I am able to turn off the van, but the key is stuck in the ACC position, draining my battery. ... In reading other comments, I see it may be the FOB so I'll carry both with me and ...

2009 Dodge Grand Caravan car lock doors not working

Jan 24, 2016 | 2000 Dodge Grand Caravan

1 Answer

Dodge grand carvan cuts ofdf at idle, new i a c motor (3,.8)

Could be a different electrical problem, or dirt in the throttle body.

Aug 19, 2012 | 2002 Dodge Grand Caravan

1 Answer

Problem with 1996 Dodge Grand Caravan i have a 96 dogde grand carvan the whole car vibrates around 40 to 50 miles and hour only when im on the excelerator. i have change tires, done a wheel balance, wheel...

Could be a bad CV joint or a broken motor mount. Check each motor mount for breaks in the rubber. Check the CV axles for slop and or mud, debris on them. Also inspect the transmission mount.

Nov 30, 2011 | Dodge Cars & Trucks

1 Answer

Where is the heater coil located on my 1996 dodge grand carvan

should be located on passenger side behind glovebox inside the plastic housing

Feb 10, 2010 | 1996 Dodge Caravan

1 Answer

I pulled codes from a dodge grand carvan the code is p0016 crankshaft sensor b1 sa1 replaced and replaced camshalf sensor also still did not fix the problem what other part should i look at

Hello! The DTC P0016 inidicates a cranskshaft and camshaft misalignment. If you only replaced the camshaft position sensor - you may need to replace the crankshaft position sensor - which is located at the top where the engine and transmission connect.

Hope this helps and good luck! Thanks for using FixYa!

Oct 16, 2009 | 2005 Dodge Grand Caravan

1 Answer

The airbag light comes on and stays on for about 20 seconds while driving. Does this intermittantly. Dodge grand carvan sport 2001 Whats it trying to tell me?

More than likely the clock spring (spiral connection) will need to be replaced, but you need to have it scanned for codes to verify. It can be several other things as well but most of the time it's the clock spring. Don't put it off too long, when the light is on the airbag system is dissabled.

Jun 11, 2009 | 2001 Dodge Grand Caravan

1 Answer

Only High speed blower front on 01 dodge grand carvan

Sounds like you need to replace the Blower Motor Resistor. It is located on the bottom of the heater box about where the passengers left foot would rest, behind glove box. It has 2 screws holding it on.

Jun 08, 2009 | 2001 Dodge Grand Caravan

4 Answers

2002 dodge grand caravan heater blower only works on high spped

If you are looking for the fan blower resistor, it is located behind the glove box. No tools need to get to it and a nut driver to remove the 2 screws to replace it. A 20$ part.

Jan 06, 2009 | 2002 Dodge Grand Caravan

1 Answer

2005 Grand Caravan Brake Job

Better late than never, right?
According to Haynes 30013: "Dodge Carvan, Chrysler Voyager & Town and Country, 2003 through 2006" Repair Manual:
Caliper Guide Pins or Guide Pin Bolts - 26 Ft-lbs

Nov 20, 2008 | 2005 Dodge Caravan

Not finding what you are looking for?
1996 Dodge Caravan Logo

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

81285 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides