Question about 1997 Honda Accord

1 Answer

1997 Honda Accord stalling and poor gas mileage

I'm running an P1382 error code and plan to have the sensor replaced in a few days. Their quoting me $300 for a new sensor or $100 for a used on which I'm obviously choosing. My stalling seems to come when I'm shifting out of park to reverse or when I shift into gear after reverse.

I'm also having issues with the car dying once I turn the key... Hopefully these problems are related to the 1382 code, but we'll see.

any suggestions would be very helpful...thanks!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 84 Answers

I would take out the main relay and check very carefully for soldering cracks.

Posted on Jul 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code p1382


P1382 HONDA - Cylinder Position Sensor 1 No Signal

Possible causes
- Cylinder Position Sensor harness is open or shorted
- Cylinder Position Sensor circuit poor electrical connection
- Faulty Cylinder Position Sensor

May 05, 2013 | Honda Accord Cars & Trucks

1 Answer

Honda civic codes p1361 & p0113 along with gas smell


P1361 HONDA - Top Dead Center Sensor 1 Intermittent Interruption
Possible causes- Top Dead Center Sensor 1 harness open or shorted
- Top Dead Center Sensor 1 circuit poor electrical connection
- Faulty Top Dead Center Sensor 1P0113 HONDA - Intake Air Temperature Sensor Circuit High Voltage

Possible causes- Dirty air filter
- Intake air temperature (IAT) sensor harness is open or shorted
- Intake air temperature (IAT) sensor electrical circuit poor connection
- Faulty intake air temperature sensor

Oct 17, 2012 | Honda Civic Cars & Trucks

1 Answer

P1382 diagnostics code keeps coming up. My car originally stalled out and the spark plugs wouldn't even fire. This is a cylinder sensor problem as I'm sure you're aware, however, I have replaced the ecu...


Thanks for choosing FixYa and welcome to the site. When it wants to die, is it at high rpm or low rpm? Also, how long did you have this problem please?

Apr 16, 2011 | 1999 Honda Accord

1 Answer

Where is the CYP Sensor A located in the 1997 Honda Accord 4-cyl. located? The trouble code from the scanner reads P1382. Can't find any real info on what to check, replace and/or repair


YOUR CRANKSHAFT POSITION SENSOR TOP DEAD CENTER AND CYLINDER POSITION SENSORS IS THREE SEPERATE SENSORS BUILT IN THE DISTRIBUTOR.

Jul 14, 2010 | 1997 Honda Accord

2 Answers

I have a Honda Accord 2003, how can i fix a downstraem Oxygen sensor.. does this affect the gas cosumtion performance.. how can i fix this.. Help.!


o2 sensor is very important part to the engine when it come to the fuel economy. o2 sensor send information to the computer (ECU) which compute and calculate ratio of burnt exhaust gases. if the engine is not run properly either is too lean or too rich the o2 sensor will detect it as the car will triger the check engine light. you can drive the vehicle which will not hurt it as long you can tolerated the light however the car will get terrible gas mileage and poor performance as the ECU will try to lean the engine out itself. o2 sensor is fairly cheap to replace and fix. Let assume the car get 30 mpg on the high way, running with check engine light/bad o2 sensor will change the gas mileage to 18-25 mpg. If the car is V6 make sure you replace o2 on both side. good luck!

Nov 23, 2009 | 2003 Honda Accord

1 Answer

1991 honda accord - runs rough and stalls on start up.


Did you set the ignition timing after you installed the dist.? If yes, I'd say you got a bad distributor(the one you just put in) since all the codes you're getting are directly for sensors located within the distributor.

May 17, 2009 | 1991 Honda Accord

1 Answer

Poor gas mileage


have coolant temp sensor checked as incorrect readings will affect running of vechile.

Mar 09, 2009 | 1990 Volvo 240

1 Answer

Poor gas mileage


sounds like a dirty fuel system or carb

Dec 02, 2008 | 1991 Honda Civic

1 Answer

97' accord, stalled on wife while driving? 5 min. later it started and stalled on it's own again. cranked it once more and she drove it home. now a couple of days later the car runs fine but the check


Your best investment is a Haynes Repair Manual, either from your local Auto Zone or similiar retailer or online: http://www.haynes.com/products/searchType/vehicleApplicationSearch2/searchEnd/yes/sfID1//sfID2//sfID3//year/1997/make/Honda/model/Accord/x/20/y/3/productID/193. Step by step instructions on troubleshooting, repair or replacement, based on a complete teardown and rebuild.

Jul 09, 2008 | 1997 Honda Accord

Not finding what you are looking for?
1997 Honda Accord Logo

Related Topics:

435 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...