It has begun to make oil stains in the driveway on the passenger side towards the front of the engine
SOURCE: changing a wheel bearing, 2003 mazda 6
to change that, using a hydraulic press is highly recommended. if you are DIY experienced, this trick works as well:
take a pice of a stable metal pipe, 10-20 cm long. and in diameter just a tick smaller than gross bearing size. take a very heavy tool and use the pipe to beat out the old bearing. dont be shy, needs a lot of power.
do not use this method to insert the new bearing. use a pice of wood instead (must sit stable on the outer bearing ring!!), lubircate a bit and beat carfully and very straigt in fractions of a mm. this is the difficult part and here the bearing may brake if you are too rough.
Not really recommend, but working when used with brain and care.
SOURCE: mazda mx5 smoking problem
Please provide more details for analysis like:
- what is the mileage on your car?
- is it smoking continously or only intermittently? How much smoke is it?
- what colour is the smoke? bluish or sooty?
- does it smoke when engine is cold or hot?
- is your car losing power?
- is your car consuming motor oil and at what rate?
- has the engine ever been overheated?
- is there an engine MIL ( malfunction indicator light ) code flashing on your dash? If it has, then you need to get the workshop to run a scan of the engine's computer to find out what the possible faults are.
- by the way, is your mx-5 fitted with a rotary engine or the common 4-stroke piston engine?
SOURCE: can't control passenger window in mazda 6
Passenger window lost programing. To reprogram, turn the key on, go to the passenger side and with the passemger switch run the window all the way down and hold switch in down position for 2 seconds, then run all the way up and hold in up position for 2 seconds, then repeat again within 5 seconds. Should work from drivers side master switch now.
SOURCE: changing side light passenger side front bulb on
its inside the headlight unit ,take the cover off and just turn the holder and it will come out
SOURCE: mazda 6 54 plate diesel ts. blowing oil seals,
this can be due to a clogged crankcase vent, have it checked
98 views
Usually answered in minutes!
×