The car cranks but not start ,I but a computer online and is doing the same. Maybe need to reset?
Need to ck y first spark , fuel presure and engine compresion, and ck timing that are te esencials to make engine work after ck for injector pulse
SOURCE: reverse suddenly quit 95 toyota camry 4cyl auto
Check your transmission fluid level asap. if the level is good, you will need to inspect the shift solenoids located inside the transmission pan. replace any solenoids that are proven to be faulty. i would also advise to test the pcm/tcm for its operational value as well. this device controls the shifting patterns of the auto trans.
while checking the solenoids, if you notice any metal fragments on the bottom of the pan, this will be a sign of major gear friction. you should re build in this case.
SOURCE: No spark, 1988 Toyota Camry 3SFE 4cyl, 5 speed.
there is no crank sensor on this vehicles 2.0L. If you have power to the coil, new coil, cap and rotor try this if not done yet>>>Unplug coil power first....Try pulling off the distributor cap, and make sure the rotor is spinning with the cam...If this fails to spin, inspect the entire distributor assembly. If it passes, Inspect all the power circuit and wiring to the dist assembly, if ok possible ecu. i recommend having a mechanic check it out!! Hopefully this helps...please rate...thanks
62 views
Usually answered in minutes!
×