Question about 1993 Toyota Camry V6

1 Answer

What kind of light bulbs do i get for the rear?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 190 Answers

Where ever you buy the bulbs from they would be able to tell you because there are many different bulbs

Posted on Jul 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Right rear turn signal works, brake light works, Front turn signal will not blink.


Looks can deceive you. If the front light comes on when the turn signal is on but there is no blink you need to find a burned out bulb on that side. Many cars have more than one bulb in the rear. One bulb out of the set can stop the blinking.

Feb 17, 2015 | Cars & Trucks

1 Answer

My elantra from 1999 have no left rear light,and no light on the instrumentpanel.the fuse "burns"emediately when light turns on.have removed the lightbowl left-rear,no differents.what else is...


there is a shortage in power somwhere in the rear light bulb or wiring check for loose wires ,or bulb it self could short the power and will blow fuse . if helpful plz rate .

Jan 19, 2011 | Hyundai Elantra Cars & Trucks

1 Answer

My wipers dont work and my right signal light flashes fast and my rear wiper dont work. some kind of sensor problem but not sure where that sensor is


ck fuses for wipers and rear wiper, the signal flashes fast most likely because theres a bulb out, turn on the hazard lights and see which bulb is out.

Jul 05, 2010 | 2001 Chevrolet Blazer

1 Answer

99 dodge ram van 1500 v6 keep blowing fuse for parking and dash lights as soon as I turn on parking lights. Where are the ground wires for the parking lights?


have you recently replaced the bulbs in the rear for the tail lights Check to see if you put the right kind of bulb in. I myself have done this. Most ground wires are in the rear going from the harness to the frame.

Jun 27, 2010 | Cars & Trucks

1 Answer

2004 Verona: how to change the brake light bulb in rear...


I just replaced 2 break light bulbs in less than 10 minutes on my 04 Suzuki Verona.

First lift your trunk lid and go to whichever side that needs replacement. There was a pull down attachment that gives you access to the whole assembly.

When you have access to the assembly locate the 2 top bulbs which will be for the brakes. Turn the plastic piece which holds the bulb counter-clock-wise to get to the bulb.

Pull out old bulb(you may have to twist it slightly). I bought a replacement pack which came with 3 bulbs(#1157). Then insert new bulb into socket until firm.

Then put it back into the housing and turn clockwise to lock it in.

Then repeat the same process for the next bulb and your good to go!

If you are having any kind of difficulties with it your owners manual shows you how under bulb replacement.

May 16, 2010 | 2004 Suzuki Verona

1 Answer

My license plate lights are out...what kind of bulbs do i need??


Check this reference guide...

2002 Hyundai Accent Car Lightbulb Size Guide
Low Beam Headlight Bulb Size: 9003/HB2
High Beam Headlamp Light Bulb Size: 9003/HB2
Parking Light Bulb Size: 2357A
Front Turn Signal Light Bulb Size: 2357A
Rear Turn Signal Light Bulb Size: 1156
Tail Light Bulb Size: 1157
Stop Light Bulb Size: 1157
High Mount Stop Light Bulb Size: 921
License Plate Light Bulb Size: 168
Back Up Light Bulb Size: 1156
Front Side Marker Light Bulb Size: 2357A
Rear Sidemarker Light Bulb Size: 168
Map Light Bulb Size: DE3175
Dome Light Bulb Size: DE3175
Step/Courtesy Light Bulb Size: DE3022
Trunk/Cargo Area Light Bulb Size: DE3022

From Sylvania Lamp Replacement Guide
License plate
168
168LL Long Life Upgrade: Up to twice the life of the standard lamp.


I hope help you with this. Good luck (remember rated this help).


Sep 09, 2009 | 2002 Hyundai Accent

1 Answer

Rear lights


Check the lighting fuses, if these are ok you have an open circuit somewhere. You will need to check it out using some kind of circuit tester to find the fault.

Oct 13, 2008 | 1995 Saab 9000

1 Answer

Left rear brake light will not work. Bulb is O.K. Flashers work but steeping on the brake pedal doesn't make left rear light work.


Hi,

A couple of possibilities:
  • corroded bulb socket - most brake lights are integrated with the rear park lights. The bulb socket would have 2 contacts, try checking if they are clean and reaches the mate in the end of the bulb;
  • wrong installation - the bayonet socket of most park/brake lights combo are offset, there is a right and wrong way if installing it into the bulb socket;
  • loose wire - it would be required to trace the left brake wire to where it joins with that of the right;
  • loose ground - same as above or a workaround is to wire an additional ground wire from the housing of the bulb socket to any screw that is connected to the body ground.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jul 29, 2008 | Chrysler Concorde Cars & Trucks

4 Answers

Front side lights


There is a contact in light wiring. At some point a wire to brake lights make contact to wire to front side light (peeled wire, bad insulated connector etc.)
You need to have your wiring circuit inspected.

Regards

May 28, 2008 | 2000 Ford Focus

Not finding what you are looking for?
1993 Toyota Camry V6 Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...