Question about 1993 Geo Metro

1 Answer

I need to take off the drivers door inside panel and replace the door handle

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

Usually the door handle comes off by removing a clip on the back side of the handle you need to push in on the panel and look to see it, fabricate a piece of coat hanger with a needle nose plies to make a small hooked end and while pushing in on panel try to hook onto and pull out clip.

Posted on Jul 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need written instructions on how to replace a outside driver side door handle for an 06 ford focus


Close/wind up the window. Remove the inside door panel. Be careful with power window switch and door speaker wiring connectors. Disconnect them before pulling the door panel away. Remove any plastic covers that may be glued to the door. Have a look at the door handle from inside the door. You will have some idea as to how to remove it. Usually door handles are secured by screws from the inside. Locate and remove them. Remove linkages to the door handle then pull handle form outside.

Jul 20, 2014 | 2006 Ford Focus

1 Answer

The door handle on the driver's side is broken...if you try to pull the handle the door does not open, you need to open it from the inside to get it open. How do we fix it?


1. You need to remove the door panel on the inside of the door first.
2. Make sure the window is all the way up.
3. Remove approximately 2 or 3 screws and the rod that is attached to the handle from within the inside of the door.
4. Replace with new handle attach screws and attach rod.
5. Put door panel back on and your done.

Oct 11, 2010 | 1990 Oldsmobile Silhouette

1 Answer

I need to replace the REAR door handle on my 98 Toyota Seinna Van Do I take apart the inside door panel or pop off the outside cover?


the inside door panel. you need to removethe assist grip and door pull ******** the lift gatetrim panel (you'll need a 10mm socket)use a flat screw driver to carefully pray all around the the panel and then pull it off. you should be able to see the handle and youll know what to do depending if you are replacing just the handle or the whole latch. good luck

Jan 05, 2010 | 1998 Toyota Sienna

1 Answer

How do i replace a drivers side external door handle it is broken at the pivot point were the rood connects


You will need to remove the door panel from the inside to gain access to the door handle bolts on the inside of the door panel. There should be two nuts to remove and then the door handle will come out.

Dec 08, 2009 | 1998 Ford Ranger SuperCab

1 Answer

How to remove and replace drivers inside door handle camry coupe


On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can replace the handle

Oct 29, 2009 | 1995 Toyota Camry

1 Answer

Need help on replacing door handle on toyota camry for the front driver side..


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If it's the inside handle, just disconnect the rod to the back of the handle to replace it. If it's the outside handle, pull back the weather seal and you'll be able to remove the bolts holding down the outer door handle

Sep 14, 2009 | 1995 Toyota Camry

1 Answer

Drivers Side Door Handle


You need to take inside door panel off This just clips on but there are screws in armrest and inside door handle look for any other small square covers that may hide screws Lift panel up Make sure window is up Disconnect wiring from panel and you can now get at door handle linkage and bolts

Jul 10, 2009 | 1989 GMC S-15 Jimmy

1 Answer

Driver door panel removal and re-connect door pull


You most likley have a damaged inside door handle. To remove the door panel, you must first remove the handle bezel. The trim piece around the handle. It is held in place by 4 retainer tabs, take a small flat screw driver, insert it between the bezel and handle. Gently pry away from the handle. If you look in the crack around the handle you will see the tabs. When you get that off, remove the switch assembly by prying up on it gently, unplug the wiring. There are 2 screws in the door panel where you pull the door shut, remove those also. Start at the bottom front of the door panel, pull outward firmly, but not violent. The retainers will come out, you will most likley break some, this is common. The inside handle is about $45 from your dealer. If it is the handle it is held in with 1 rivit, drill it out with a 3/16 drill. Replace the handle, reassemble. Good Luck.

May 05, 2009 | 2000 Cadillac Escalade

1 Answer

Replacing the driver side inside door handle


Find and remove two screws visible on the door panel, including underneath small covers. Pop them off with a small screwdriver. Lift front edge of control panel, then pull forward and lift out. Pull upper door panel from door. Disconnect courtesy light connector. Disconnect door open handle cable assembly and door lock cable assembly. You might need to lift panel and twist to get it off.

Feb 23, 2009 | 1998 Lexus Sc 300

1 Answer

Door handle


the inside handle and otside both work the release seperate.
what you need to do is take the door panel off the inside by a couple screws (usually in the arm rest) and several plastic clips
around the perimiter which will pull out when you pry out on the panel. You can do this carefully with a screw driver but the proper
fork tool from parts store will be easier. look inside door at latch
and see if your piece is broke or possibly the rod may have just come out and need to be put back in place. If your handle piece is broke it is easy to replace once your inside the door.

Sep 04, 2008 | 1991 Buick LeSabre

Not finding what you are looking for?
1993 Geo Metro Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Mike Gilbreath

Level 1 Expert

50 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...