Question about 1998 Dodge Ram

4 Answers

I need the location of MAF sensor in a 1998 Dodge

I need to locate the MAF sensor in my 1998 Dodge RAM 1500 5.2L

Posted by on

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 158 Answers

Your vehicle dose not have a maf sensor. They used a map sensor it is on the engine located under the front of the breater where it attaches to the engine.

Posted on Jul 02, 2009

  • Doug Bauman Dec 30, 2011

    So is it an aftermarket?

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 195 Answers

Hello;
Typically the MAF sensor is located between the air filter box and the intake. There should be 3 or 4 wires attached to it.
Thanks;
Rich
RPM Northwest

Posted on Jul 02, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mine is located in the back left quadrant of the air intake. Unless it's aftermarket, our trucks do have them.

Posted on Dec 30, 2011

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

It is located were the intake manifold plenum is. Usually somewhere after where the throttle valve is. If you are still having a problem locating it you can go on ebay motors and aquire a repair manual on a cd that has a electrical locator schematic for $15.00

Posted on Jul 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 dodge ram 4x4 with a 5.9, engine has been idleing rough, it idles fine for about 30 seconds then runs rough, almost to stalling, also the gas mileage is like 3 miles to the gallon. i had it...


If the speed sensor code is coming up change it. the sensor went out on my truck and it would die when i was slowing down and hit the clutch to downshift

Jan 26, 2013 | 1998 Dodge Ram 1500 4WD

1 Answer

IAIR FLOW SENSOR LOCATION 1998 DODGE DURANGO 5.9


Your vehicle is not equipped with a Mass Air Flow (MAF) sensor, but it does have a Manifold Absolute Pressure (MAP) sensor. Here is a picture of where it is located.

93_cr99duran_14-030b.png&width=560&height=467&displaytype=display&imgrotation=&links=

Sep 21, 2012 | 1999 Dodge Durango

1 Answer

Location of IAT/ MAF Sensor on 1998 5.9 Dodge Ram 4x4 and wire color code


the chip system from Gforce is more then just a resister...it is a programmable chip and resistors and Diodes and more...they have come along way since the first ones they built...

Jul 16, 2012 | 1998 Dodge Ram 1500 4WD

1 Answer

WHERE IS THE SPEED SENSOR LOCATED ON 1998 DODGE RAM 1500 TRUCK?


left side of transmission, in the tail housing, it is the furthest back sensor in the transmission.

Feb 12, 2011 | 1998 Dodge Ram

1 Answer

The engine light has come on and remain on since today...there is no noticeable changes in how the vehicle drive but im nervous that it maybe something costly eg sensors etc. (vehicle 2007 Dodge Ram single...


Not still under warranty? Your problem is more than likely the maf sensor.. it's located in the ducting going to the top of the engine. buy a can of crc electrical cleaner from an auto parts store and wash/sprayy rhe sensor clean. do not touch, rub or contact the sensor with any other cleaners han or rags. Let it dry and reinstall everything. You will see the sensor in the ducting. Type MAF sensor in a search box and youcan find some pictures and an explanation of it's design and function. Good Luck-Ned_

Sep 17, 2009 | 2007 Dodge Ram Truck

1 Answer

Where can i find a engine diagram of a dodge 1999 3500 van


Do need you to know where the sensor is located ? If so it's located inside distributor housing, just below rotor on (3.9L-V6 5.2L-V8 5.9-V8) 8.0L-V10 cam sensor is located on the timing chain cover.

Jul 01, 2009 | 1998 Dodge Ram 3500 2WD

1 Answer

Could you tell me where I can locate the IAT sensor in an 02 dodge ram 1500 with a 4.7 V8


Here is the location ...

80d410a0.gif 1 - LEFT SIDE OF THROTTLE BODY 2 - ELEC. CONNECT. 3 - IAT SENSOR 4 - RELEASE TAB

Jun 11, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

Location dodge 1500 4x4 5.2 1996 map sensor


Your map sensor is mounted on the throttle body. This is what you're looking for.a2184d5.jpg

Apr 27, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

P0171 code


these engines are know for leaky intake gaskets also replace your cap and rotor.

Mar 03, 2009 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
1998 Dodge Ram Logo

1,900 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...