Egr valve bolt torque
SOURCE: Starter Problem
if you drop the trans. dust cover on the bottom of the bell housing you should dee your fly wheel. Place your starter in the position and line up the shims (if needed) . adjust the starter in enough to where it clears the torque converter and shim outward if needed
SOURCE: proper torque for bolts on front wheel
The axle nut spec is 177 foot lbs. and the bearing to knuckle bolts spec is 133 foot lbs.
SOURCE: need head bolt, intake manifold, and exhaust torque specs
Cylinder Head Bolt Step1- (25 FT.Lbs) Step2(45 Ft.Lbs) Step3(65Ft,Lbs).....Intake Manifold(35Ft Lbs)....Exhaust Manifold Center (20Ft Lbs) All Others (20 Ftlbs).....Thanks
SOURCE: head bolt torque specs on a 97 gmc jimmy 4.3
First, tighten the bolts to 25 ft. lbs. (34 Nm).
Next, tighten the bolts to 45 ft. lbs. (61 Nm).
Finally, tighten the bolts to 65 ft. lbs. (90 Nm).
To install:
607 views
Usually answered in minutes!
×