Question about 1993 Audi 100

2 Answers

I replaced the water pump and radiator in my 93 audi 100. Both top and bottom radiator hoses get hot and pressurized, but the water seems not to be circulating, and will overheat within about 15 minutes...any suggestions?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Wwhere is the location of the thermostat on a 93 audi cs 100 quattro

Posted on Aug 26, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

Replace the thermostat and flush the cooling system.

Posted on Jul 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Top half or Radiator is hot while the bottom half remains cold . Is this normal


This can be due to one of a few different things...First of all, water flows from the engine to the bottom of the radiator, using the water pump and gravity, and the water returns from the radiator back into the engine on the top side.

Thermostat isn't opening...this causes the water / antifreeze to remain in the engine, and not flow through to the radiator. If the water / antifreeze gets hot enough, it should activate the thermostat and water should flow into the radiator through the bottom radiator hose.

The bottom radiator hose is either worn out (there is a spring inside the length of the bottom hose. it is there to keep the hose from collapsing under the suction pressure during normal use) If the hose feels spongy, soft, or shows signs of cracking, replace it.

The radiator may be clogged, preventing the water from flowing freely through all of the 'fins' in the grill section of the radiator. Hot water usually isn't just in the top section during a clogged radiator situation...

Jan 09, 2015 | Cars & Trucks

2 Answers

The water in my mazda bongo wont circulate top hose gets very hot while bottom hose stays cold , heater wasnt working but now managed to get heater working after bleeding the system but bottom hose still...


Check the radiator-it may have blockage. Take it off and turn upside down and flush from the bottom.
If the top hose gets hot, that means the thermostat is opening. The bottom hose should be at least warm, and quite warm if radiator flow is good.

Feb 13, 2014 | 1995 Mazda MPV

2 Answers

My car overheats very easy.i can drive 1 exit on the highway and the temp goes up very fast. i dont know what it could be. there is always fluid in the reserve area and doesnt seem to be getting low or im...


COULD BE THERMOSTAT IF TOP RADIATOR HOSE IS NOT HOT AND BOTTOM RADIATOR HOSE GOING TO WATER PUMP IS HOT THE THERMOSTAT STICKING PARTIALLY CLOSE.IF TOP HOSE IS HOT THE RADIATOR,ENGINE BLOCK HEATER CORE NEED FLUSHING OUT.IF WATER PUMP WEEP HOLE LEAKING REPLACE WATER PUMP, FAULTY WATER PUMP WILL CAUSE ENGINE TO OVER HEAT.REPLACE RADIATOR CAP MAKE SURE YOU HAVE 50 / 50 MIX SOLUTION ANTIFREEZE AND WATER IN COOLANT SYSTEM. IF ALL LOOKS GOOD CHECK ENGINE OIL ON DIP STICK, IF OIL IN DIP STICK LOOK LIKE MILKSHAKE YOU HAVE BLOWED HEAD GASKET THAT WILL CAUSE ENGINE OVERHEATING WHILE DRIVING CAR IN SHORT DISTANCE AND ENGINE OVERHEATING.

Aug 16, 2011 | 1999 Oldsmobile Alero

1 Answer

My coolant resevoir is full but top coolant hose is empty. Is there a bleeder system?


Here is a basic description of cooling system, the top hose going to engine is the supply hose the bottom hose is the return hose. On your overflow coolant reservoir there is a lower cold level mark and a hot level mark above it also there is an overflow drain spout several inches above hot level mark to relieve pressure if system is overfilled. As to a bleeder system, bleeders purge air from a system to allowed it to become primed (pressure built up) generally on hydraulic systems like brakes or pneumatic systems like a diaphram pump for example. the only drain available is the petcock valve at the bottom of the radiator used to drain coolant. Now to your top hose being empty, you can remove top hose to engine have a garden hose running into radiator and if radiator cores are not stopped up water should flow freely from hose if not radiator is clogged. If you have water flow now you can pressure test system it should hold between 15-18lbs pressure constantly otherwise check all hoses/clamps etc (if leaks were present before replace faulty component/s) your vehicles water pump circulates coolant and is what pressurizes cooling system. A faulty thermostat will also restrict coolant from entering the engines coolant passageways if it doesn't open and your vehicle would overheat soon after, but you should still have coolant in upper hose when engine is running regardless. If you can add other info like your vehicle is running hot or coolant light coming on I can narrow it down for you.

Jan 07, 2011 | 1996 Pontiac Sunfire

1 Answer

Overheating


When you mention the radiator having a hot upper in pipe and a cool bottom out pipe tells me that the coolant is not moving around the engine. This could be down to a water pump not working, blocked radiator, thermostat not opening. The bottom hose should be cooler than the top hose but once the engine is up to working temp which is around 85/90 degrees c for an audi the bottom still should be farly hot to touch. Hope this helps

Jun 01, 2009 | 1996 Audi A4

Not finding what you are looking for?
1993 Audi 100 Logo

Related Topics:

363 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14333 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...