Question about 2004 Lincoln LS

1 Answer

BRAKE NOISE MY 05 LS MAKE A CRUNCHING NOISE WHEN YOU PUT THE BRAKE ON. THE DEALER PUT A NEW POWER BOOSTER ON AND THE PROBLEMS STILL THERE. IF THE CAR SITS OVERNIGHT IT WILL TAKE ABOUT 10-20 MIN BEFORE YOU HEAR THIS NOISE. WHEN THE BRAKE IS APPLIED THE NOISE COMES FROM THE PEDAL NOT AT THE TIRES, ITS HARD TO EXPLAIN THE SOUND BUT ITS LIKE WHEN YOUR ABS KICKS ON THE SOUND THAT MAKES. THE BRAKES SEEM NOT TO WORK AS WELL WHEN THIS HAPPENS. THE DEALER TOLD ME THAT IF THEY PUT ANOTHER NEW BOOSTER IN THE MANUFACTURE OF THAT PART SAID IT JUST MAKES THAT NOISE. ANY HELP WITH THIS? DUPD120@YAHOO.COM

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 101 Answers

Ive never heard of such a thing. Any vehicle ive ever driven the booster does not make that noise.. i dont know how to help you, but im pretty sure its not the booster, dont waste your money there

Posted on Jul 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 chevy siverdado 1500 Has new master cylinder,booster,brake calipers bled all lines back to front.drove a round the block The brake are soft with a hissing noise go to the floor some times.


Had the exact same issue with an 04 Cadillac srx. Replaced the booster twice...finally put my old "defective" master cylinder back on and brakes worked fine. Turned out the new master cylinder was bad...even though the symptoms point to the booster. Do check the vacuum hose going to the booster first though. Have seen those go bad and cause weird problems and it's the easiest thing to check first.

Oct 30, 2016 | Cars & Trucks

1 Answer

I was told that my brake booster is going out, but reading some of the other problems I want to make sure it's not a vacuum leak. My car acts lik it wants to cut off and has actually cut off twice when...


when you feel very hard to push the brake pedal, then must be problem of brake boosters. you can try to change a new one brake booster ,we supply all kinds of brake boosters ( vacuum brake boosters), toyota brake booster, Nissan brake booster, chevrolet brake booster etc, feel free to ask any questions. www.fiverhope.com

Aug 02, 2013 | Cars & Trucks

2 Answers

Toyota 4 runner brake booster noise


if you can see brake fluid around the booster then yes it is most definitely not right, but sometimes these can fail without any fluid noticable, the visible fluid could mean that the brake master cylinder is failing & this will have an adverse affect on the booster power & performance, check your brake master cylinder first as this is a much simpler & easier repair than the brake booster & can be done at home on a flat drive or or street even, a Haynes manual is invaluable for the home mechanic & i recommend you get one as soon as you can as this will help you diagnose the problems with your vehicle before going to a mechanic/garage, if it is the brake booster at fault then i suggest you go to your local scrapper/breakers yard armed with tools & the Haynes/Chilton's Manual (Depending on which side of the pond you are from) & remove the brake booster from a now deceased Toyota 4Runner & remove the brake booster & master cylinder in one should only cost you a few Quid or Bucks & replace the part once your vehicle is back at home, once the parts have been replaced the brake system will need to be bled so that there is no air in the brake lines, this can be easily done with two people at home, Jack up one corner, remove that wheel & then just crack off the bleed nipple of the brake line Putting a bit of clear hose over the nipple to catch the excess brake fluid in a jug etc & have a friend push down slowly on the pedal, when only fluid comes out with no air then the system is bled for that wheel, Check the level in the brake master cylinder & repeat the process for the other 3 corners/wheels Once done your brake pedal should fell firm & Not spongy, If you get a spongy feeling when braking after this then there is still air in the brake lines & the system needs to be bled again, of course if you have done it right then your brakes should feel firm underfoot. Please don't forget to rate me, regards, Paul.

Sep 21, 2012 | Toyota 4Runner Cars & Trucks

3 Answers

Power brakes aren't working. hissing noise when braake is stepped on.


Sounds like the vaccum hose is off to the brake booster. Check that its is right behind the brake fluid rev. were you put the fluid in for the brakes. If the line is fine it could also be the booster its self.

Mar 10, 2011 | 1998 Chevrolet Blazer

2 Answers

A few seconds after brakes are applied the pedal starts to fall to the floor. When I pump the brake pedal I here a hissing noise coming from the vacuum booster.


you have two problems here, your master cylinder has a leaking seal, the low pedal is resault, the power brake booster rubber diaphram is damaged and leaking from the brake fluid that is getting into it from the master cylinder, these are sold as a unit that has been rebuilt.

Sep 28, 2009 | 2001 Buick Century

1 Answer

Crunching in rear of car


do you need new brakes

Jan 25, 2009 | 2000 Subaru Forester

3 Answers

05 impala steering noise. Rack or Power steering pump


the power steering fluid is probly the first thing u should check if that doesnt fix it replace ur fluid pump,.the resevior should be right around ur brake booster and master cylinder,.hope u fix it and find it

Nov 20, 2008 | 2005 Chevrolet Impala

2 Answers

19984 F150 Hissing Brakes


This noise is the seal for the power brake booster leaking, you will have to replace the vacuum booster to fix it.

Nov 12, 2008 | 1984 Ford F 150

3 Answers

Parking brake


05 LS, i also have the same problem, heater blowing hot and parking brake light coming on. i just read that the malfunction from the (dual coil water control valve) will cause a spike in the system an will set off the parking brake light. The dealer wanted $645 w/tax to install a new water control valve Ford Part # 2R8Z18495AA, YEAH RIGHT !!!! I found the part on line for $110 w/shipping, i am going to install my self. Its sits behind the radiator passenger side about 6" deep from the fender. very easy to get to , one bolt, one sensor needs detached and the 3 heater hoses that go to it need clamped off before replacing it. As far as the brake light i read that you have to get the brake re-calibrated by the dealer, I dont know yet. If you want the web address for the part let me know. i also posted where to find your code for your door access on a 05 LS. dupd120@yahoo.com

Oct 20, 2008 | 2004 Lincoln LS

Not finding what you are looking for?
2004 Lincoln LS Logo

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...