Question about 2006 Mitsubishi Lancer

1 Answer

Hi i have a mitsubishi lancer 1.3 petrol 2006, i

Hi i have amitsubishi lancer 1.3 petrol 2006, i dropped the key and now I think the immobiliser has engaged, how do I reset this?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 128 Answers

Wow ok i am from australia our lancers only come in a 2.0 or 2.4 i was shocked to see a 1.3 lancer
now with the key
every time you incert the key into the ignition it reads the key as there is a chip in the orignal keys so thatway the immobiliser knows thatit is safe for the car to start
if the cra can not read the key it will not let the car start evan if it is twisting to start etc
you need to go to mitsubishi and have them copy some new keys and let them reset the codes on the immobiliser if you try to do so your self it may trigger a cold shut down
this is when the immobiliser its self needs to be replaces as well as the keys
hopes this helps
ricko

Posted on Jul 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Locate the fuel filter on a 2006 2-0litre Mitsubishi lancer


likely dropped into the gas tank, and, with any luck, there should be access if you remove the rear seat coushin

Mar 01, 2015 | 2006 Mitsubishi Lancer

1 Answer

How do i completely remove the immobiliser in a 2000 lancer and replace with older non immobiliser type ignition


i think this would be an expensive excersise,try removing the fuse to the central locking , because if you change the immobiliser system you will loose the central/power locking any way, i don't know what problems your experiencing but i've done this on our hyundai coupe because of immobiliser problems and unlocking drivers door manually ie with the key has cured our problem ,worth a try i'd have thought

May 05, 2014 | 2000 Mitsubishi Lancer

1 Answer

Disabling immobiliser lancer 98


If you have 1 key then you can take the sensor out your 1 key and use it to by-pass immobiliser. See example video.

Jan 25, 2014 | 1998 Mitsubishi Lancer

1 Answer

I used a new spare immobiliser key to start up a Lancer 2002. The engine turned over but the car would not start. It's the first time I have used this spare key. I tried using the original key but the...


You may have tripped the theft immobilizer if your original key had a chip in it. Try disconnecting the hot (+) wire on your battery for 10 min. and then using your original key to start it.

Nov 01, 2013 | 2002 Mitsubishi Lancer

1 Answer

My 2006 mitsubishi lancer es sedan ran out of petrol and is now air locked and I was wondering if you could tell me where to rewmove the fuel line from to remove the air lock?


If i were you i would follow air filter hose to the engine then take it off pour a few ounces of Gasoline into engine then try to start this should take air out of the line and the vehicle should resume running again. Good Luck !!!!!!!!

May 05, 2011 | 2006 Mitsubishi Lancer

1 Answer

Have a 2002 Mit lancer and won't start


You probably have to replace the control unit or module for the anti theft mechanism. It normally looks like a small black box. Or , did you change your key , if yes you would have to reprogram the module to accept the key. If you have more clarifications just e-mail me. Thanks.

Oct 31, 2009 | 2002 Mitsubishi Lancer

1 Answer

Wont start


Hi
Had a similar problem with my x type 2.5 petrol, only had the car 1 day went to start it nothing happend all the lights came up on the dash but the engine wouldn't start and the immobiliser light stayed on. Spoke to Jaguar they had no idea and I couldn't get it to them. After disconnecting the battery trying to reset the immobiliser phoned and auto locksmith they came out and discovered the end of the key with the blade had lost it's coding and the immobiliser was not disarming, they reprogrammed the key and the car started no problem. As far as i know there is no way past the immobiliser. Hope this helps.

Aug 11, 2008 | 2002 Jaguar X-Type

Not finding what you are looking for?
2006 Mitsubishi Lancer Logo

Related Topics:

874 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...