Question about 1995 Isuzu Trooper

1 Answer

How to remove crank shaft pulley without air tools thanks!!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Isuzu Master
  • 450 Answers

With fan and fan shroud removed use socket and long breaker bar (can use pipe on over breaker bar for extra length) put on and jam bar onto right side of vehicle chassis rail (your left when looking at engine) quickly flick ignition key to crank so it jolts crank bolt loose

Posted on Jul 02, 2009

  • Mark Wright
    Mark Wright Feb 10, 2012

    Ok...good method but you have stated the wrong side. The bar should be on the left side of the vehicle....nearside as opposed to offside (your right when facing engine from front of vehicle) when you crank engine the crankshaft nut (when facing it) will rotate clockwise.

  • Ivan Musar
    Ivan Musar Jun 09, 2017

    Thanks Mark, hope it'll work on my MB 600

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the crank shaft pulley on a 2005 Pontiac grand am ?


Auto Zone, Advance and other parts stores have free loaner pullers and other tools. You pay a deposit until it is returned

Sep 07, 2014 | 2005 Pontiac Grand Am

3 Answers

I need to remove my front seal ( crankshaft) possibly without any fancy tools?


Pulling and replacing a main seal on a crank cannot be done without "fancy" tools. If you go to www.autozone.com and make a free account and then put in the make and model and year, you will be able to access the free online repair guides. Also if there is an autoparts chain near you, you can rent those fancy tools.

Dec 05, 2012 | Cars & Trucks

1 Answer

Hello I have 2004 Kia Sorento...has a bolt seared from the crank shift pulley?? I think I am saying this right...that was a recall already was fixed. Its broke again so it can not be fixed asked a recall...


its a crank shaft pulley bolt if its broke off flush you cannot drive it any where cause if you do the pulley will fall off and then your engine is scrap so if you can make the room you need in front remove rad belts pulley and so on if your a good machanic now at the crank with the pulley off you might see the end of the bolt try to take a small punch and try to tap on it slowly without damage more it might turn if not you have to drill a hole in the center and then try to put in a easyout tool to remove broken stud if not you can call a mobile welder to come and weld a nut or bolt on the shaft to remove it no torches electric there are seals and rubber belts inside the cover i all else fails call a garage and tell them to give an estimate how long it will take because it can be a long job and exspensive

Aug 30, 2011 | Kia Sorento LX Cars & Trucks

3 Answers

How to set timing when you relesh tensioner and it changes the alignment postion of pullies 2000 ford ranger 2.5 l


Here is the trick. Align marks. Put the timing belt on the crank shaft pulley first, and after on the overhead cam pulley. Release tensioner and rotate the crank shaft till the timing belt makes two full circles. Try to align marks, you will be at least one tooth off. Align the crank shaft on the mark, and find out how many teeth you are off at the cam shaft pulley. Count the teeth. Remove the timing belt from cam shaft pulley only. Move cam shaft pulley in reverse according to the number of teeth you counted. Make sure the crank shaft pulley is on the mark. Mount the belt at cam shaft pulley.Rotate the belt two circles and check the marks. Repeate this procedure til after releasing the tensioner, and rotating the timing belt two full circles, the mars will be align.

Nov 22, 2010 | 2000 Ford Ranger SuperCab

1 Answer

Change a crankshaft position sensor on a 2000 eclipse


Is this a V6 or 4cyl???>>>(V6) This requires removing the Harmonic balancer (crankshaft pulley). Remove (R) front wheel, remove engine splash Guard, Remove crank pulley, remove lower timing belt cover. The Crank sensor is located behind the crank shaft pulley!! I highly recommend having this done by a certified tech, requires special tools. Hopefully this helps!!

Mar 11, 2010 | 2000 Mitsubishi Eclipse

1 Answer

How to replace timing belt 1995 vw golf


  1. remove air intake pipe, and box (upper and lower section)
  2. take off timing belt cover
  3. take off serpintine belt, and v belt
  4. rotate engine to TDC marks line up on crank and cam. camshaft says O^T on it and on the cover behind gear, crank has a notch in the pulley and a arrow on the cover to line up
  5. remove crank pulley 6mm allens not the 19mm 12 bolt
  6. make sure timing belt is still at TDC remove lower timing belt cover there is 3 bolts and a nut holding it on the nut is by the water pump and the bolts are on on top and 2 behind the crank pulley
  7. remove cover
  8. mark intermediate shaft shaft right above the crank pulley
  9. remove belt
  10. install reverse of removal make sure to line up all 3 pulleys cam crank and intermediate shaft or it wont run and depending on how bad it is out of time if you do it wrong you could bend valves
Assuming this is a 2.0 8v your question is pretty vague

Feb 23, 2010 | 1995 Volkswagen Golf

1 Answer

Is there a special tool needed to take off the crank shaft pulley on a 1990 honda accord


If your having issues removing the crank pulley bolt you can get a special tool from snap on tools.It slides inside the pulley and holds it in place so you can break the bolt loose.Once the bolt is removed the pulley will slide off.

Feb 07, 2010 | 1990 Honda Accord

1 Answer

How to remove crank shaft bolt gmc s 15


you need an air impact gun to get retaining bolt out/off, then a pulley puller special tool to remove the pulley once the bolt is out, the pulley is pressed on.

Sep 15, 2009 | 1988 GMC S-15

1 Answer

Crank shaft pulley


Not too hard if you have a pulley puller. Remove the belt, remove the crank shaft bolt, pull the crank pulley off, then reinstall in reverse order.

Jul 02, 2009 | 1990 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1995 Isuzu Trooper Logo

Related Topics:

590 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...