Question about 1998 Nissan Frontier

1 Answer

Odometer reads 999999 spedometer does'nt work

Gas and temp gauge goes all the way to top

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 464 Answers

Since the odometer reads such a high meter rate. it should be old atleast for 3 to 4 years. you have to replace the odometer "worm ", inside (i dont know there might be a different name for that part in your country). you have to contcact a repairman and get it done.

Posted on Jul 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan Terrano 1997 R50 ,gauges on instrument cluster not working


Greetings

"Great choice of service Repair and Manuals"Large pictures deals or discounts is there.You buy in less amount so please use it

May 25, 2016 | Cars & Trucks

1 Answer

What would cause fuel gauge to stop working, and tripometer, and odometer to stop working?


I don't know that any one thing would cause these issues.

As for the fuel gauge, you may need to replace the sending unit in the tank.

As for the trip/odometer, you may need to replace the gears.

Jul 23, 2015 | 1993 Ford Thunderbird

1 Answer

How do I fix my gauges? (Ie, gas gauge, temp gauge, speedometer, odometer)


Fuses? Blown fusible link? Most gauges work by getting 12 volts from the ignition switch when on, and getting a ground from the sender. Often the 12 volt supply wire goes to more than one so if dead, both will fail. If you have a wiring diagram, you might find which wire to cluster should be hot, and trace it backward to find the issue. Easier to check for ignition switch feed first.

Jul 01, 2015 | Cars & Trucks

2 Answers

My '98 Nissan Frontier has odometer reading of 999999, full fuel hot temp speedo up to20mph tach not right. What's wrong and best place to get parts?


The instrument cluster is messed up. Best bet is to take it out and send it to one of the several companies that repair them. The cheapest I found was www.dnaspeedometers.com. But do NOT buy one from a junk yard because it did the same thing after about a month. I was out $100. Please contact me if you need anymore info at rcg2322@bellsouth.net

Aug 22, 2009 | Nissan Frontier Cars & Trucks

1 Answer

My spedometer, odometer, fuel gauge, temp gaug are all not working. My light comes on but that is it. Its a 98 oldsmobile cutlass.


could be a bad fuse in fuse box. also it may be your ignition switch, check at fuse for ignition, and see if voltage is presant. if not switch is bad. if you have voltage replace a bad fuse.

Jun 30, 2009 | 1991 Honda Accord

3 Answers

Dash guages going crazy


Your dashboard circuit is probably burnt out. The same thing happened to me, it's like a $20 part but is about $60 with installation, check with a dealer though.

Mar 27, 2009 | 1998 Nissan Frontier

1 Answer

Speedo


Common problem with these units. We have been repairing them successfully for over 10 years. Visit http://www.mrwhizard.com for more info.

Nov 14, 2008 | 1998 Nissan Frontier

3 Answers

1997 CE Lancer speedometer


i had the same problem on my g/f's 2000 lancer GLXi, (with tacho),
i fixed the problem by putting a jump wire on the back of the instrument cluster,
the fault was in the wiring to the tacho part & i drew up my own wiring diagrams for the cluster unit,
then traced the fault,
looking @ the back of the cluster unit, the top right hand screw for the speedometer,,, follow the track on the circuit-board, there is a link wire UNDER the board (there is a dotted line on top where it goes, i think its the left 1,,, there is 2) this track then goes to the bottom left screw on the tacho,,,
i soldered a small gauge wire from the bottom of the link solder joint (MAKE SURE ITS THE CORRECT LINK, THERE IS 2 SIDE BY SIDE) to the bottom right track on the vertical plug socket (its common pos for the warning lights) this is where the "MIRAGE" & other "CE LANCER" (without tacho) gets its speedometer & gauges power from,

kind regards waz
if anyone needs a photo i will pull out the dash again lol its only 6 screws

Jul 17, 2008 | 2003 Mitsubishi Lancer

Not finding what you are looking for?
1998 Nissan Frontier Logo

523 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...