Question about 1998 Hyundai Elantra

1 Answer

I don`t know what can I do

Hello,
I have an elantra 1998 station wagon, the problem whit this car is the next, I put the shift on D position and press the accelerator pedal the car don`t have enough power. what can I do whit this problem? I took the car on many mechanic and they can`t give me a solution, if you can help me, i`ll feel very good
Thank`s

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 382 Answers

FIRST CHECK GEARBOX OIL
PLACE YOUR FOOT ON THE BRAKE AND FEEL IF THERE IS A DIFFERENSE WHEN MOVING GEAR SHIFT IN AND OUT OF DRIVE IS THERE MOVEMENT WHEN GOING INTO REVERSE MAKE SURE THE ENGINE IS RUNNING.IF NOT IT COULD BE THE TORQUE CONVERTER OR PUMP THAT IS FAULTY

Posted on Jul 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Shifter stuck in neutral shift lock release button will not push in to shift in gear


shift lever does not move out of the PARK position with the ignition ON and the brake pedal pressed ?

Jan 18, 2015 | 2006 Chevrolet Trailblazer

1 Answer

1998 Hyundai Elantra wagon.Do I need to change the crank position sensor.. I use the obd 2 and it said need to change it...


The fault code may have included the crank position sensor in a list of probable causes . If you are having starting problems then I would replace it .

Sep 05, 2013 | Cars & Trucks

1 Answer

98 elantra wagon shiftlock override broken?


what are the codes. sounds like 1 or 2 of your shift control solenoids in the transmission are bad

Jul 17, 2012 | 1998 Hyundai Elantra

1 Answer

Key won't come out of ignition switch on a 1998 Hyundai. The switch will turn to all positions, but just refuses to come out.


check the automatic shifter lock that you press in when you go to shift. if that is not all the way out it will prevent it for coming out.

Dec 26, 2009 | 1998 Hyundai Elantra

1 Answer

1998 Ford Taurus Station Wagon SE


CODE P500 VSS NO SIGNAL.PROBLEM COULD BE CONNECTOR TO VSS IS SHORTED OR THE MAGNET GEAR ON TRANSMISSION DRIVE SHAFT COULD BE BROKEN OR MISSING TEETH.

Aug 04, 2009 | 1999 Ford Taurus

1 Answer

1998 Hyundai Elantra wagon shift lock sticks


dear friend-remove the cable from the gearbox,then move the gearshift to see if that is free.if that is free then move the link on the gearbox to see if that is normal.that should give you a idea of were the problem lies.

Jul 25, 2009 | 1998 Hyundai Elantra

2 Answers

Shifting problems with 1998 Hyundai Elantra wagon


It is a problem with the electronic torque converter clutch circuit. inside the tranny

May 05, 2009 | 1998 Hyundai Elantra

1 Answer

I got a 1999 Hyundai Elantra Station wagon 4 Cil. 2.0 and I got a coputer analisis with the troubleshooting P0442 and I willlike to know what it means, how I can to know what I have to do?


According to my book, it is a evap system small leak detected. Usually a loose or faulty gas cap. Is the car running good? Check your gas cap, erase the code and see if the code comes back. Good luck. Phil

Jan 08, 2009 | Hyundai Motor 1999 Elantra

1 Answer

LOADING GASOLINE HYUNDAI ELANTRA AUT. 1998 WAGON


what black box and why does it need fixxing im not sure I understand your question,cause I got thanks for trying,maybe you should repost

Jul 15, 2008 | 1998 Hyundai Elantra

Not finding what you are looking for?
1998 Hyundai Elantra Logo

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...