Question about 1984 Dodge Ramcharger

2 Answers

I have a 1984 dodge ramcharger, with a 2 barrel holley carb. he starts but shortly after shuts down. if we try again it is flooding. we put a nother carb and he still dose the same thing. while we r trying to start he starts, but as soon as we let go of the key, he dies. would this be a and ele problem r is it the carb

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 189 Answers

Check BALLAST RESISTER on firewall driver's side beside main plug for wiring harness !
I have a 1984 prospector, same exact semtoms,had pryor experience with other dodges,so i looked and wire was of of resister put it back on truck started right up,and kept running.
jump across termanals of ballast resister, if truck starts replace resister
hope this helps!

Posted on Oct 16, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had a similar problem with mine. try replacing the spark plugs. that seemed to do the trick for me. i no longer have any problems starting mine.

Posted on Jul 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need 2 replace accelerator pump diaphram 4 holy 64-3262 carb would like visual breack down


Please watch the Holley instructional video on the replacing of th epump in any Holley series 4 barrel.
Click HERE

Jul 12, 2012 | Dodge Cargo Cars & Trucks

2 Answers

I have a 1984 Dodge d150 4x2 truck. I was driving down off the highway and i lost all power. i thought it was the fuel pump, i replaced it and gas flowed better. i started to drive again and i lost power...


have you checked for spark? check all the leads going to the coil from the battery and from the coil to the distributor, if any are loose or faulty it will cause you to lose all power, also check the terminals.

Jun 21, 2010 | 1984 Dodge D150

2 Answers

How do you adjust the float in a holley carb series 6280


Go to Holley.com they have links to you tube videos showing how to adjust the floats and choke on all their carbs.

Mar 29, 2010 | 1985 Dodge Ramcharger

1 Answer

1985 dodge ramcharger, carburetor issues


Sounds like a problem I had with my '85 Dodge D150 Ram Prospector. In my case, the automatic choke was broken and it was starved for air during acceleration because the choke was always closed. It ran fine at idle or very slow acceleration. I wired the choke open and it runs much better, although it is much more difficult to start as the fuel mix is lean due to the extra air. Once it gets warmed up, though, it runs fine. I hear that the barrel carb on mine often has problems.

Jan 29, 2010 | 1985 Dodge Ramcharger

1 Answer

1987 dodge ramcharger is leaking fuel from carburetor, is there a kit to fix the carburetor?


Yes, check at local auto parts store, but they may have to order it, seeing how everything is pretty well fuel injected now. Look for a tag attached, or at least some numbers, make of carb, such as holley or carter, 2 barrel or 4 barrel etc that they can use for reference.

Dec 03, 2009 | 1987 Dodge Ramcharger

2 Answers

How to put on a Holley carburetor on my 1984 camaro? I am taking off an electrical one and replacing it with a single pumper holley. Is their any thing else i will have to purchase?


What do you mean "electrical one?" If you are taking off a Quadrajet, and putting the Holley on, NO it will not fit, You will need to replace the intake manifold.

Nov 06, 2009 | 1984 Chevrolet Camaro

2 Answers

Cannt start 360v/8 dodge cw two barrel Holley floods badly


your needle jets on the float may be sticking or could have come loose from its retainer pc.

Nov 08, 2008 | 1983 Plymouth Gran Fury

Not finding what you are looking for?
Cars & Trucks Logo

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...