Question about 2004 Chevrolet Impala

1 Answer

Reset message center window

How to reset the message center window?
1. low tire pressure
2. low engine oil
both these issues have been addressed but the message is still there

2004 chevy impala ls

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 39 Answers

THIS SHOULD HELP YOU

Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three times within five seconds. If the CHG OIL SOON light flashes two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHG OIL SOON light comes back on, the system has not reset, repeat the procedure. Follow this procedure to reset the GM Oil Life System using the DE 100 Series Radio®. Turn the ignition to ACC or ON and the radio off. Press and hold the DISP button on the radio for at least five seconds until SETTINGS is displayed. Press the SEEK up or down arrow to scroll through the main menu. Scroll until OIL LIFE appears on the display. Press the PREV or NEXT button to enter the submenu. RESET will be displayed. Press the DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second. Once the message has been reset, scroll until EXIT appears on the display. Press the DISP button to exit programming. A chime will be heard to verify the exit.

Posted on Jul 02, 2009

  • bsaddleback Aug 24, 2011

    I recently bought a 2009 Impala and the message center is telling me to "Service Traction Control and the engine light comes with another regarding the engine powering down. On two occasions the car stalled with a message that says the starting system is resetting. What do ytou think the problem is?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do you reset the low tire pressure light?


To reset the tire pressure system, do the following:

(NOTE!....Do not reset the check tire pressure system without first
correcting the cause of the problem and checking
and adjusting the pressure in all four tires. If you reset
the system when the tire pressures are incorrect,
the check tire pressure system will not work properly
and may not alert you when a tire is low or high.)

1. With the engine off, turn the ignition to ON.
2. Press the MODE button until the DIC reads LOW
TIRE PRESSURE HOLD SET TO RESET.
3. Press and hold the SET button until you hear a
chime, and TIRE PRESSURE RESET is displayed.

You will hear three chimes, then the LOW TIRE
PRESSURE message will go off and the DIC will return
to TIRE PRESSURE NORMAL. If the LOW TIRE
PRESSURE message comes back on, the check tire
pressure system has not reset. Repeat the procedure.
The system completes the calibration process during
driving. The system learns the pressure at each tire
throughout the operating speed range of your vehicle.
The system normally takes between 30 and 60 minutes of
driving to learn the tire pressures. The system normally
takes 10 to 20 minutes of driving in each speed range to
learn tire pressures. The speed ranges are 20 to 40 mph
(32 to 64 km/h), 40 to 60 mph (64 to 96 km/h), and above
60 mph (96 km/h). This time may be longer depending on
your individual driving habits. The learning process does
not need to be completed during a single trip. Once
learned, the system will remember the tire pressure until
the system is reset.

Jun 02, 2014 | 2004 Buick Rendezvous

2 Answers

I just bought my 2001 aurora at an auction and have the following issues....1. low oil pressure light is on 2. low cooliant light is on 3. low tire pressure light is on. 4. the low fuel light is on. 5. ...


i bought a 2001 aurora at auction and it ran great but drivers side windows didnt work and had transmission code(i think it was p07410 and had low oil pressure warning when idling and oil low light came on at idle also! junk!!! i had the oil changed and oil sending unit changed and they left the plastic off the broken window and the car wouldnt start and none of the windows worked at this point! i had it towed to electrical shop and i had a short in the harness under the drivers seat(from water corrosion) that caused a transmission code, all windows not to work and car not to start! now i spent $350.00 and car starts again and pass windows work and no more transmission code! i repaced both driver side regulators and motors with new parts(also had to reparair rear track in driver door with pop rivets) now all windows work! now i'm driving car that runs great but the light for low oil pressure and low oil light are on agin ay idle(very common on these junks!!!)! get rid of the car and be done with it!!! toyota! toyota! toyota!

Oct 26, 2011 | 2001 Oldsmobile Aurora

1 Answer

How do i reset flashing low tire pressure,change oil soon after the problem is taken care of?


To reset the tire pressure message, first make sure all pressures are appropriate, then turn the ignition on with the engine off. Press and hold the GAGES button located on the left side of the steering column until TIRE PRESSURE appears in the display. Press and hold the RESET button for 5 seconds until TIRE PRESSURE RESET appears then release the RESET button.

To reset change oil soon message, press GAGES button until OIL LIFE displays. Press and hold RESET for 5 seconds.

Mar 15, 2011 | 1998 Buick Park Avenue

1 Answer

I have a 2003 Impala and the low tire pressure message is on the message center. I have tried turning the light switch on and off 3 times while the car is in the on position and I have tried pressing the...


Page 2-46 of your owners manual. If you don't have one you can get on online version from the chevrolet website. Just click the owners link at the top of the page.

TIRE MON (Tire Inflation Monitor Reset)
This feature allows you to reset the tire pressure monitor after checking all tire pressures. To clear the LOW TIRE PRESSURE light from the instrument panel cluster and reset the low tire pressure monitor do the following:

1. Scroll, using the SEEK/PSCAN up or down arrows, until TIRE MON appears on the display.
2. Press the PREV or NEXT button to enter the submenu. RESET will be displayed.
3. Press the TUNE/DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.

The low tire pressure monitor is now reset.

Feb 08, 2011 | 2003 Chevrolet Impala

2 Answers

The words tire reset keep on popping up on my dashboard. What does that mean, and how do I get rid of it? 2004 Ford Freestar.


With and without "Mesage Center" respectively (pretty sure)

With the engine on...

Push "Setup" button, until your driver display says something like "Press Reset for system check".

Then push Reset. The system check will start, rotating through a series of checks.

About the fifth or sixth check will be the tire pressure. The system will sound the tone (same one that starts w/the light) and It'll say something like "Check Tires Pressure" on that moment press and hold for 3 or 4 seconds Reset. When you release the Reset button It'll show "Hold Reset if tires are OK". While that's up, hold the Reset button. After 3 or 4 seconds, the tire warning light will blink 2 or 3 times and then will stop .You need to be ready for it, because you don't get very long to release.

How to reset the low tire pressure warning if the vehicle does not have the "Message Center"

Turn the ignition to the ON position,
depress and Trip/odometer button (located in the instrument cluster) until "TIRE RESET" or "CHECK TIRE AND RESET" is displayed in the odometer display window.
Once "TIRE RESET" or "CHECK TIRE AND RESET" is displayed, press and hold the button for three seconds.
The low tire warning indicator light will flash three times as the low tire warning system begins to initialize.

This information is in the Owners Manual

Hope it helps

Nov 04, 2010 | 2004 Ford Freestar

1 Answer

The message center shows low tire pressure why?


the message center wants you to check air pressure in all of your tires,one or more is low on air.Once you find the one or more that is low you will have to reset that part of the computer.read in the owners manual under low tire pressure and it will tell you how to reset the computer.

Jun 18, 2009 | 2005 Chevrolet Impala

3 Answers

Where is the low tire reset button located on 2005 ford freestar?


It is on the same button as the Trip Odometer. Cycle through until you see Tire Reset and hold the button down.

Mar 28, 2009 | 2005 Ford Freestar

1 Answer

2005 ford freestar reset light on


Vehicles Without Message Center To reset the system, press and hold the odometer reset button and wait for the "TIRE PRESSURE SET" light to illuminate. Continue to press the button for 3 seconds, then release. After 3 seconds, the low tire pressure warning lamp will flash 3 times, indicating that the low tire warning system reset procedure is complete.
Vehicles With Message Center To reset the system, press and hold the SETUP button and wait for the message center to display "REST FOR SYSTEM CHECK". Then press the RESET button and wait for the message center to display "HOLD RESET TO RELEARN". Press and hold the RESET button for 3 seconds. The message "HOLD RESET TO RELEARN" and the low tire warning lamp will flash 3 times, indicating the reset procedure is complete.

Mar 12, 2009 | 2005 Ford Freestar

2 Answers

I just changed the oil in my 2002 Impala LS and filled the tires to the proper psi but the message center still reads both messages.....change engine oil..........tire pressure low. What do I need to do to...


ok this can be done 2 different ways 1 , with the radio controls , should be in the owners manual , or the easier way , to reset the oil maintinence light , turn the key to the ON position , engine OFF , depress the gas pedal to the floor 3 times within 5 seconds and it will reset ,

now the tire monitor system , same deal should be in the owners manual , and done with the radio controls , or the easier way , turn key to ON position , engine OFF , cycle the parking lights 3 times within 5 seconds , (turn on - turn off = 1 cycle)

pretty cool huh? but make sure your tires were properly inflated before you reset the tire monitoring system .

Jan 02, 2009 | 2002 Chevrolet Impala

4 Answers

2003 chevy impala low air pressure message light stays on how do i re program it?


If by low air air pressure, you mean the tire pressure sensor, here is the way to reset.
To reset (calibrate) the system: The tire pressure
monitor system can be reset two ways. With the ignition position at ON, pull the interior lamps control to the ON and OFF settings three times. It can also be reset through the radio using the
following steps:
1. Turn the ignition to ACC or ON and turn the radio off.
2. Press and hold the TUNE DlSP button on the radio for at least five seconds until SETTINGS is displayed.
3. Press the SEEK SCAN up or down arrow to scroll through the main menu.
4. Scroll until TIRE MON appears on the display.
5. Press the 1 PREV or 2 NEXT button to enter the submenu. RESET will be displayed.
6. Press the TUNE DlSP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.
7. Once the monitor has been reset, scroll until EXIT appears on the display.
8. Press the TUNE DlSP button to exit programming. A chime will be heard to verify exit.

The system completes the calibration process during
driving. The system normally takes 15 to 20 minutes of driving
in each of three speed ranges to "learn" tire pressures. The speed ranges are 15 to 40 mph (25 to 65 km/h), 40 to 65 mph (65 to 105 km/h) and above 65 mph (105 km/h). When learning is complete, the system will alert you after two to eight minutes if a tire is 12 psi (83 kPa) different from the other three tires. Detection thresholds may be higher and detection times may
be longer on rough roads, curves and at high speeds. The system is not capable of detection at speeds greater than 70 mph (110 km/h).

Almost all of the message center items are accessed through the menu on the radio. You should be able to find what you need be getting in the menu and looking around. Hope this is what you were looking for?

Aug 10, 2008 | 2003 Chevrolet Impala

Not finding what you are looking for?
2004 Chevrolet Impala Logo

849 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...