Question about 1995 Jaguar XJ6

1 Answer

That's the issue, need the code after replacing battery.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,923 Answers

Are you referring on the code for your car stereo? If yes, I'm regretfully informing you that none of us could provide you the exact code for your stereo.

Because it is the 'Anti-theft' feature of the car stereo. You may want to check the glove box that came with your car and there should be a card where you can find the code.

If you still cannot find the code, take the radio out, get the serial number that's on either the back or on the side of the radio and then call the manufacturer or the reseller and they are the only one that could provide you that code.

I do apologize, but these are that things that you may do.

Have a great day!

Posted on Jul 02, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

07 Cobalt issues

You must have the fault code read and identified before you can begin to understand the issue.. It takes a special scanner to read these codes.

Jun 16, 2016 | Cars & Trucks

1 Answer

Alternator not charging battery (replaced alternator and same issue) tested and no codes showing, alternator shows good and battery shows good. Could be a break in a wire between the two or what Help

Yes. The field control wire feeding power into the alternator needs testing and the output from the alternator to your battery also needs testing. Either one can cause low charging of the battery. Corrosion or loose connections are common issues as well as broken strands of wire internally . A fuse or fuseable link sometimes burns out in the cable from the alternator to the battery .

Dec 16, 2015 | Cars & Trucks

1 Answer

My alarm keeps going off on my 2007 impala for no reason

It is most likely faulty Body Control Module(BCM) that is causing this. Replacing the BCM will probably solve the issue but is is worth having the vehicle scanned to see what fault codes are being generated.

As a first step though have the condition of the battery checked and make sure the battery terminals are clean and the cables firmly clamped. If the battery is weak and in need of replacement it can create numerous electrical issues, trigger warning lights, mess with the alarm and security system etc etc., so you need to eliminate that as a possibility first. Contaminated and dirty battery terminals can affect current flow through the cables so these need to be very clean so there is optimum contact between the battery terminals and the cable clamps.

Nov 24, 2015 | Cars & Trucks

1 Answer

Won't start 10percent of time but does other times. New battery and cables from battery.

Replace your distributor cap and rotor, if so equipped. If you still have an issue, replace the ignition coil. Check your ground wire from the battery to the starter. It could be a fuel issue. You will need to a code reader, if you can't determine which. Sounds like you are going with an electrical system fault. (The ECU could also be an issue, rebuilt ones are available for around $100 on line.)

Mar 12, 2015 | 2007 Pontiac Grand Prix

1 Answer

Check engine, battery, oil lights are on?

The Check Engine tells you that something is wrong about your ride. Get your ride check for error code and take necessary steps to resolve the issue. Also you can post the error codes so that we can help you to solve the issue. Battery light lit means that your battery needs to be charged or the electrolyte in the battery is low. Also it can be possible that the battery needs replacement. Last the oil light alerts you to change the engine oil. The engine oil prevents the engine components from wearing due to friction and suppresses the heat generation keeping the metal parts in proper working condition.

Jul 18, 2013 | 2011 Hyundai Elantra GLS

1 Answer

New battery installed, no volume in radio

This is a common issue. Your radio needs a security code entered into it. You can get this code at your local dealership.

Jan 29, 2012 | 2004 Ford Expedition

1 Answer

I got a 9352 code for my 2005 explorer and a paer # 4L2T-0849-CK

This problem is faced by many other too.the battery of the vehicle gets internally drained and causes this error code problem.if your battery is too old then get irt replaced.but if its new or not very old battery then get it checked by replacement battery first and confirm the problem.In most cases its battery problem. but if in case the same problem is noticed with new or other spare battery then,you will need to get the car scanned .Auto zone cant retrieve instrument cluster codes. There scan tool is not sophisticated enough. You need a dealer or independant shop tool. It will not be a fuse issue. it will be a shorted circuit or instrument cluster assuming you retrieve codes stateing loss of power.This will help. Thanks.Helpmech.

Nov 12, 2010 | 2005 Ford Explorer

1 Answer

Multiple error codes reported: U0100

UO 100-109 typically loss (or near loss) of communications with Onstar. Problem may be loose harness connection or defective onstar backup battery. I'm working on this issue with my 2008 Vue as we speak. I had a very similar code before, last year, and the dealer replaced the battery and the issue was resolved. There does exsist a service dept advisory informing dealers of this Onstar battery issue. Good luck.

Sep 15, 2010 | 2008 Saturn VUE

2 Answers

Need to know how to remove the check engine light on my 2004 cr-v. both oxygen sensors needed replacing and i've done that. codes are clean now. i did the battery thing and the light is still on.

On these new advanced vehicles only a forced reset of the computers memory will work, Also ensor replacement might not have been the only issue. I would go to a local pep boys or such and have them read codes, and tell them to clear the codes after retrieving codes.
happy motoring

Sep 29, 2009 | 2004 Honda CR-V

2 Answers

BMW Z3 can timeout instr2, instr3 instrument cluster not working

You need to perform a static discharge on the vehicle. Remove both cables from the battery and touch the two cable ends together(you may need a jumper wire) for a few minutes. Reconnect the cables to the battery and check it out.

Dec 09, 2008 | 2001 BMW Z3

Not finding what you are looking for?
1995 Jaguar XJ6 Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

79847 Answers


Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides