Question about 2000 Toyota Celica

2 Answers

P0440, P0441, P0446

I had my car inspected and received codes P0440, P0441, P0446. I understand this emissions, but what exactly needs to be fixed and how should I go about this to not get overcharged or ripped off and make sure it gets done right the first time.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Where is Evap Emission Control System Purge Flow fault

Posted on Jul 20, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 39 Answers

Error code P0446 is an Evaporative Control System vent control malfunction. DTCs P0441 and P0446 are recorded by the ECM when evaporative emissions leak from the certain components, or when there is a malfunction in either the VSV for EVAP, the VSV for
pressure switching valve, or in the vapor pressure sensor itself.

Posted on Jul 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello there,my 2001 echo is lighting up trouble codes p0440 p0441 p0446; how and where should i start?


code p0440 refers to evaporative emission (EVAP) system--malfunction=== causes --hose connections --intake leak--EVAP canister purge valve
code po441 refers to EVAP --incorrect flow detected==causes the same as for po440
code po446 refers to EVAP system vent control --circuit malfunction===causes --wiring---EVAP can purge valve--ECM
generally I would replace the purge valve as it is common to all codes

Feb 03, 2014 | Cars & Trucks

1 Answer

Code p0440 code p0441 code p0446on toy echo 2000 what is the diagnosis?


P0440 Evaporative Emission Control System Malfunction P0441 Evaporative Emission Control System Incorrect Purge Flow P0446 Evaporative Emission Control System Vent Control Circuit Malfunction
  • Remove and reinstall the gas cap, clear the code, and drive for a day and see if the codes come back.
  • Inspect the EVAP system for cuts/holes in tubes/hoses
  • Inspect for damaged or disconnected hoses around the Evap purge solenoid
  • Check and/or replace the sensor
  • Check and/or replace the purge valve
  • Have a professional use a smoke machine to detect leaks

Aug 19, 2011 | 2004 Toyota ECHO

3 Answers

2001 Avalon Check engine codes P0440,p0441 and p0446.


yes it would be a smart thing to do and no it is not that hard it should onlt have two bolts holding it on

Aug 03, 2009 | 2001 Toyota Corolla

3 Answers

2000 lexus es300 error code p0440, p0441, p0446


P0440 Evaporative Emission System, P0441 Evaporative Emission System Incorrect Purge Flow , AND P0446 Evaporative Emission System Vent Control Circuit

Apr 23, 2009 | 2004 Lexus LS 430

1 Answer

2001 corolla chack engine light on.


P0440= Evap Control Sys Malfunction
P0441= Evap Control Sys Purge Flow Fault
P0446= Evap Control Sys Vent Ckt Malfunction

Mar 30, 2009 | 2001 Toyota Corolla

1 Answer

2003 toyota Matrix code p0441 and p0446...need help


p0441 - Evaporative emission control system Incorrect purge flow. can be caused by a lot of things and is usually related to a small leak in the emission control evap system, try replacing the gas cap and see if it helps, if not, the system needs to be tested for a leak with the scantool or a leak tester or both.
usually you will see p0440 p0441 and p0446 together but before anything replace your gas cap and besure to tighten it down when you gas up the vehicle, 90% of the time with those codes either a loose gas cap of bad gas cap gasket is the problem

Otherwise - Might be a canister leak, defective VSV valve or hoses, bad gascap seal.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Mar 17, 2009 | 2003 Toyota Matrix

1 Answer

2001 Lexus engine check light on VSC off light on


You can actually google this by putting lexus code ### for each one it will tell you what each one means

Jan 27, 2009 | 2004 Lexus LS 430

3 Answers

P0440,p0441,p0446


These codes are all for the Evaporative Emissions System.

P0440- Evaporative emissions system fault- just saying there's something wrong with the system.

P0441- Evaporative emissions system- Incorrect purge flow- saying that the system isn't purging the raw fuel vapors (hydrocarbons- HC) as well as it should.

P0446- Evaporative emissions system- Control valve circuit low- there is a valve, usually located on the charcoal canister at the rear of the vehicle, that opens to allow fresh air to enter the evaporative emissions system as the engine vacuum purges the fuel vapors from the charcoal canister and closes when purge is not needed to prevent leakage of those fuel vapors to the atmosphere (HC is a greenhouse gas and is regulated as such by the fed gov't).

Given that you have the incorrect purge flow code and the control valve code together, my bet is that the vent control valve has failed (causing the P0446) and is not opening to allow fresh air into the system to displace the air from within the system that is being pulled to the engine. Since you have no fresh air entering the system, the engine will pull a vacuum on the system instead of the vapors "flowing" into the engine (causing the P0441).


I hope that this is helpful to you!!!


ASE Master Technician with L1 and X1 Certifications; Nissan Scope Technician; Chrysler Level 3 Silver Technician- 12+ years experience.


Nov 17, 2008 | 2001 Toyota Corolla

2 Answers

Car codes


When you have P0440, P0441 and P0446, it is a very good bet that the fuel cap was loose, or the fuel cap rubber seal is compromised. You will get all three of those codes every time that the cap is loose. Always make sure that the fuel cap is as tight as you can get it after you refuel.

Nov 05, 2008 | 2001 Lexus RX 300

Not finding what you are looking for?
2000 Toyota Celica Logo

5,744 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...