Question about 1988 Chevrolet S-10

1 Answer

Runs but dont want to idle smooth tech 4 motor sometimes it smooths out then rough again thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 39 Answers

1 Inspect M.A.P. Sensor Faulty M.A.P. Sensor. 2 Inspect EGR Valve Improperly Functioning or Faulty EGR Valve. 3 Inspect Fuel Injector Dirty or Worn Fuel Injectors. 4 Inspect Idle Air Control Valve Damaged, Loose, or Faulty Idle Air Control Valve. 5 Inspect Idle Speed Actuator Damaged, Loose, or Faulty Idle Speed Actuator. 6 Inspect Throttle Position Sensor Faulty or Incorrectly Connected Throttle Position Sensor. 7 Inspect Fuel Filter Clogged or Dirty Fuel Filter. 8 Inspect PCV Valve Plugged or Damaged PCV Valve. 9 Inspect Carburetor Worn, Faulty or Damaged Carburetor. 10 Inspect Valve Burned, Worn, or Sticking Exhaust Valves. 12 Inspect TimingSet Slipped TimingChain or Worn TimingGear(s). 13 Inspect Fuel Pump Faulty Fuel Pump. 14 Inspect Camshaft Camshaft Lobes Worn. 16 Inspect Point Set Burned, Worn or Incorrectly Set Ignition Points.

Posted on Jul 02, 2009

  • Albert
    Albert Apr 11, 2014

    I changed several of the above parts..... I also changed the oxygen and knock sensor(s)

  • Albert
    Albert Apr 11, 2014

    By the way, that was on my 1989 ChevyBlazer FullSize

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1996 Volvo 960 it runs rough sometimes at idle and under load what could cause this?


Could be your cat converter is breaking apart.could be your air flow sensor is dirty. Could even be a dirty fuel filter, plugs or your coil going bad.

Aug 30, 2014 | Cars & Trucks

1 Answer

Why wont my car start ?


throttle postion sencer

May 02, 2014 | Cars & Trucks

1 Answer

Rough idle in 740 1990 Volvo Smooths out a bit when driving


When it idles rough it could be several things but, an easier thing you can do 1st is cleat the throttle body of any carbon(black stuff) with throttle body cleaner or something like carb cleaner. Ive used brake cleaner sometimes. But yea, look up your cars info about your motor and just clean all the black carbon off of anything at the throttle body and you may even need to take some of it apart to get down in there with a rag, little cleaning brush and the cleaner. Clean the thing you can move by hand called a "butterfly".

Jan 03, 2014 | 1990 Volvo 740

3 Answers

My 91 oldsmobile 98 runs rough in idle but when driving run smooth.


Rough idle is a very common problem on 4 cylinders, but I believe the 98 Regency has a 6 cylinder in it, right?

Sometimes the coil packs get iffy, and sometimes the EGR Valve gets a leak in it causing a rough idle.

When the accelerator pedal is depressed, it can change things so that the engine seems to run smoothly.

However, I would look for codes to see if anything intermittent is occurring in the engine that may need attention.

The OBD-I scanner can help to diagnose the problem, if anything is out of specifications on the engine in question.

The owner will have to find a technician that has such a scanner.

Aug 29, 2010 | 1991 Oldsmobile Ninety Eight Regency

1 Answer

Running roug at low idle, smooths out at 2500 rpms


change plug and wire if its been a while most cars have 90000 miles platinum plugs in them.but the wires wear before plugs.so change plugs and wires.+clean fuel injectors .change fuel filter and air filter.if car still run rough your idling to low.have idling check .

Jun 06, 2009 | 2001 Oldsmobile Alero

1 Answer

Not idling smoothly, sometimes having to restart at a stop w/ tranny in drive.


sure, that could be it. I would also suspect the fuel filter as well.

Jul 11, 2008 | 1997 Ford Aerostar Extended

Not finding what you are looking for?
Cars & Trucks Logo

422 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...