Question about 1994 Pontiac Grand Am

1 Answer

No signal lights - bulbs and fuses are fine

No signal lights and bulbs and fuses are fine - is it the flasher unit and if so, where the heck is it? And if not, what could it be and what do I do? Have to work in a couple of hours and my car is my work. Thanks!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 578 Answers

Flasher is up under neat the dash below steering you have to take apart dash

Posted on Jul 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is on 1987 pontiac 6000 are the bulbs for turn signals How do I get to them? & or the flasher ? Is it in the fuse box?


The turn signals at the rear share the same bulb, same filament on the bulb even, as the brake lights. So if you have brake lights, the rear turn signal bulbs are good. If I recall, you access the rear bulbs from inside the trunk, and pretty easy to change bulbs. Look for a panel or trim piece in the trunk that covers the light bulb assemblies. You turn the bulb sockets a quarter turn counter-clockwise and pull them out, then you can replace the bulbs. They are two filament bulbs-one filament for the park lights (tail lights) and one filament that serves for brakes and turn signals together.
The flasher unit is a small round cylinder, I don't believe it was in the fuse box, but located up under the dash, close to the steering column. The hazard flasher unit was also up under there and looks the same. Look for them on a bracket near or by the steering column, possibly one on each side of the steering column To find the turn flasher, turn your hazard switch on. The little round unit that is clicking-you may hear it or feel it click with your finger on it-is the hazard flasher. The turn flasher will be the one that is not clicking. A little round cylinder is how you identify it.

Jun 03, 2014 | Cars & Trucks

1 Answer

Dodge ram 1500 2007 turn signal malfuction


Good job, and good joe to you for solvin it! Now you'll remember that's a common indicator of a burnt out bulb. For some reason I can't explain, that is how a bad bulb acts on the flasher unit - by more rapid clicking (breaking contact inside the flasher relay at a quicker rate). It seems both the front and rear signal lights have to be working for the normal flasher rate ...well good.

Aug 22, 2012 | Dodge Cars & Trucks

1 Answer

My saturn signal light work sometime than go off if it the flasher please tell me there it is in my car


IF TURN SIGNAL LIGHT DONT WORK SOME TIMES.CHECK FOR BLOWED OR LOOSE FUSE.CHECK TURN SIGNAL BULBS AND CHECK BULB SOCKETS FOR CORROSION.CHECK TURN SIGNAL FOR BAD GROUND.USE JUMPER WIRE BETWEEN GROUND SIDE OF THE TURN SIGNAL BULBS AND A GOOD CHASIS GROUND.IF ALL IS GOOD TURN SIGNAL SWITCH IS BAD OR FLASHERS GOING BAD.TURN SIGNAL FLASHER LOCATED ON CENTER CONSOLE SIDE PANEL GRASP THE FLASHER UNIT AND DETACH IT FROM THE FUSE BOX.IF YOU HAVE EARLY MODEL VECHICLE FLASHER UNIT LOCATED AT THE FRONT OF THE FUSE BLOCK.

Aug 23, 2011 | Saturn LS Cars & Trucks

2 Answers

I have a 2000 Ford Escort. My left turn signal inside is blinking real fast. Outside it isn't working. Also, the brake light and Haz.Flasher isn't working on the outside either on the left side....


In the fuse panel with the fuses inside the car there are two big round units plugged into the fuse panel, one is your turn signal flasher one is your hazard flasher. I would start with those and move to other things if that doesn't fix it. Hope this Helps.

May 26, 2011 | Ford Escort Cars & Trucks

1 Answer

95 suburban. turn signals not working at all. flashers and all other lights work fine. flasher unit good. fuses and bulbs good. any idea? thanks


it could be a short if you have trailer wiring, try unpluging the wiring and see if that works, be sure you looked at the right flasher the hazards and flasher have diffrent flasher units. its possible to have a bad turn signal cam, or a malfunction in your hazard switch.

Aug 28, 2010 | Chevrolet Suburban 1500 Cars & Trucks

3 Answers

Turn signals dont blink.


You need to replace the turn signal flasher, it's a cylinder shape and may be silver or gold in color. When it goes bad, the turn signals stop flashing. Good luck and keep me posted.

Feb 16, 2010 | 1994 Chevrolet S-10 Blazer

1 Answer

Have four way flashers in front of car but no turn signals on front or rear of car but yet i still have parking lights and brake lights and have replaced the bulbs and the fuses are not bad and the flasher...


The most common cause of your problem is the Flasher Unit. Functioning four way flashers doesn't mean the existing unit is working. Also, there are multiple flasher units on some cars. Since the bulbs are all working, replacing the flasher unit makes the most sense.

Dec 11, 2009 | 1994 Chevrolet Cavalier

1 Answer

My turn signal lights are no longer working, bulbs seem fine. whats the problem?


If none of your turn signals are working, try pushing in the hazard flasher button on your car, to see if all four lights flash. If not, you need to first locate the fuse to the flasher circuit, and if it is good, locate the flasher unit. It is usually located near or plugged into the fuse panel.

Oct 29, 2009 | 2004 Chevrolet Monte Carlo

1 Answer

1997 Chevy Tahoe both turn signals stopped working


Sounds like the flasher unit to me. Normally the emergency flasher and turn signal are separate.

Jul 21, 2009 | 2001 Chevrolet Tahoe

4 Answers

Front driver side turn signal light doesn't flash.replaced bulb,replaced socket,all other lights work on emergency flasher,except front driver side.rear driver side turn signal light works,but flashes...


replace flasher......usually located in fuse block area...listen in this area....select passenger side ...then select driver side...you can hear flasher clicking...you have seperate flashers for each...FLASHERS are small cubes plugged into fuse block....probable bad driverside flasher

May 09, 2009 | 1998 Buick Century

Not finding what you are looking for?
1994 Pontiac Grand Am Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...