Question about 2004 Dodge Ram 1500

1 Answer

My 2004 Dodge Ram engine light came on,put in drive it wouldn't move. I had computor check done & showed code PO 700

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,056 Answers

The code indicates a malfunction in the transmission control system. I will be back with you to see if I can find the location of this box, if you don't already know.

Posted on Jul 01, 2009

  • Ronado Panaligan
    Ronado Panaligan Jul 01, 2009

    have you checked the fuse yet? it might just be a burnt fuse

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2007 dodge caliber has comm problems but when it lets u in has alot of codes in it but will not acclerate at all


Has to go to a shop & be in the hands of a person
able to diagnose those codes & all vehicle issues

Nothing you can do with any suggestions on today's
technology,be lucky if a shop or dealer can figure it out

May have ruined the trans by trying to continue to use it,
when you had a dash light on & know you have fault codes

May 15, 2014 | 2007 Dodge Caliber SXT Sport Hatchback

1 Answer

2003 dodge intrepid will not shift into third


It sounds like the TCM has reverted to Safe Mode because it has detected a problem.

http://www.obd-codes.com/p0700

Aug 22, 2012 | 2003 Dodge Intrepid

1 Answer

2004 Dodge SX 2.0 Base 4Cyl2.0L - the following codes are showing: P0732, P0700, P0731 and P700 again. my check engine light came on and within a week, on my way home one day, the gears gave out and did...


Check your transmission output shaft speed sensor. First check that the connector is clean, free of corrosion, secured firmly and that wires have good insulation. If all looks well at this point then disconnect the speed sensor, remove it and clean its tip of any debris and see if this clears the DTC. If not change the sensor for a new one (less than $30). This should fix it.

Apr 14, 2011 | 2004 Dodge Neon

1 Answer

2000 dodge ram check engine light came on. code p 0720 is


P0720 is a code for the output shaft speed sensor on the transmission. If you are handy with a volt/ohm meter you can test the resistance of the sensor unpluged. should be 500-700 ohms. or you can just put a new sensor in, its a comon problem.

Jul 08, 2010 | 2001 Dodge Ram 2500 Truck

1 Answer

Have2004 intrepid shows engine light and error codes po340-& po344


code po 340 no camshaft position sensor signal at powertrain control module and code po344 rationality error detected for intermittent loss of camshaft position sensor circuit. hope this will help you!!!!

Apr 18, 2010 | 2004 Dodge Intrepid

2 Answers

P1493 code


If you are running any extra systems, ie amps, subs, high watt speakers, etc. etc. you may need to get a better batter, like the blue. or yellow top one. check with auto zone.

Mar 11, 2010 | 2001 Dodge Ram 2500 Truck

3 Answers

05 5.7 hemi burning 1 qt every 700 miles


Rings & bearings & oil pump need urgent attention!
Cheers Rob

Sep 19, 2009 | 2004 Dodge Ram 1500

1 Answer

Different lights are coming on in dodge 1/2 ton locks not working etc etc. checked all fuses all good husband thinks it is the computor gone bad how to check the computor if bad


BCM or body control module is usually the culprit there.Often mounted near drivers left foot area on firewall & brake pedal area, or near fuse panel. Have heard of some being cured by simply disconnecting battery for a few seconds & erasing all codes, as well as updating with scan tool at dealer, otherwise new one may be required but I'd go with a scan first at least if necessary after battery disconnect.

Sep 13, 2009 | 2004 Dodge Ram 1500

1 Answer

2004 dodge ram 1500, v6, 3.8 automatic, check engine light


what code did the mechanic say it had on it was it a shift solenoid or torque convertor lockup solenoid.

Aug 24, 2009 | 1999 Dodge Ram

1 Answer

I have a 2004 Dodge Ram with a Hemi and the Scan tool I own will not communicate with it and the local parts store pulled a code for me showing a bad EGR valve, yet all my literature does not even show the...


My 2004 Ram has the same issue. Check engine light and the truck sometimes will stall out when breaking. The EGR valve is about $60 at NAPA and its not hard to install, i think four bolts hold it in. Then undo your battery for about 10 minutes and the check engine light should reset.

Jun 10, 2009 | 2004 Dodge Ram 1500

Not finding what you are looking for?
Cars & Trucks Logo

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...