Question about 2000 Toyota Corolla

2 Answers

My Toyota Corolla rear bumper has at big dent on

My 2000 Toyota Corolla rear bumper has a big dent on the drivers side. Please give me instructions on how to replace the bumper cover or a website that I can free download a service manual. Thanks.

Sonny

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 578 Answers

You have to take the whole bumper off and the bolt the u see holding it on the re-bar and bumper cover should come off

Posted on Jul 01, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Use a hot hair dryer. Push from back side.

Posted on Aug 08, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I pop-out a big dent in the plastic bumper of my 2007 Toyota Sienna?


You need to remove the bumper outer shell from the backing of crumple pad, but doubt that it will say popped out

Feb 28, 2017 | 2007 Toyota Sienna

1 Answer

How to take out rear bumper from 2003 toyota corolla?


If you follow the same techniques as in this video, you should be fine.....attached video of 2011 which should be very similar to 2003 TOYOTA CAMRY 2011 REAR BUMPER COVER REMOVAL REPAIR

May 26, 2014 | 2003 Toyota Corolla

1 Answer

2000 toyota corolla...the car was in a crash,damage to driver side front.I have replaced parts(fender,bumper ,etc)but now the park light or signal light will not work.when I turn the turn signal on for the...


you need to check the fuse for it. with no power going to it that is the most likely explanation. other than that, trace the wire from the light and be sure there is no breaks

Aug 26, 2010 | 2000 Toyota Corolla

1 Answer

Need part name or description


it's called a FILLER piece. I can be ordered at dealer or a local junk yard. Just replaced one , cost for part was $15 used.

Apr 21, 2010 | 2004 Toyota Corolla

1 Answer

Toyota Sienna bumper dent


These vans have a styrofoam bumper wrapped in semi-rigid plastic. When you dented the bumper you probably dented the styrofoam as well, so depending on how deep the dent is you may not be able to bring it back to normal.

The surest way to fix the dent would be to remove the bumper by unbolting it, then taking out the styrofoam and pushing out the dent.

Apr 03, 2009 | 2006 Toyota Sienna

1 Answer

Need to remove rear bumper cover from a 2009 Toyota Corolla


paint it on the car or simply remove all the bolts and screws.  Duh

Mar 15, 2009 | 2009 Toyota Corolla

1 Answer

How do I remove the back bumper (plastic) on a 2003 toyota camry?


you can heat the bumper heat gun ( you can rent one i think?)
this will soft the bumper so you push it out easily on the car

1. inside your trunk remove small back clips in trim panel
2. remove tail lamp four 8mm nut perside unplug wires
3. remove black clips under tail lamps ( flat head screwdriver to pull center of the clip up slowly then remove the hole clip)
4. three if the some clips are bottom if the bumper
5. three or four 10mm nuts in side the quarter panel on the right and left side
6.four s shape clips are top bumper that will pull loose
7. with some help slide bumper by pulling it off it
8. when you reinstall the bumper you may need to tape the strophe reinforcement in place

Feb 24, 2009 | 2003 Toyota Camry

2 Answers

Corolla 2003 rear bumper


Pop the trunk and remove the screws or clips thats connecting the bumper there, and then do the same thing in the wheel wheel and under the bumper along the lip and it should come right off. There might be some under the tail lights so you might have to take out the tail lights.

Jun 23, 2008 | 2003 Toyota Corolla

1 Answer

2004 toyota rav4 rear bumper assembly guide


there are two bolts to the center and two around the corner on at the edge up high and one at the bottom of the bumper/ Please rate my response thank you very much

Jun 16, 2008 | 2004 Toyota RAV4

Not finding what you are looking for?
2000 Toyota Corolla Logo

1,969 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...