Question about 2004 Ford Focus

1 Answer

Ford focus front axle replace i'm doing it my self need pictures or info on if spindle should come off?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 578 Answers

You dont need a picture look at how the spindle of the bolt that connect the spindle

Posted on Jul 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the left front axle on a 1996 ford contour


remove the tire and wheel. remove the axle nut from center of hub. remove caliper. remove lower ball joint connection to spindle. pull spindle out and swing away from the axle. remove axle from transaxle

Apr 14, 2015 | 1996 Ford Contour

2 Answers

2006 ford focus zx4 se brake drums wont come off.. how do you take them off correctly


you need to loosen the adjustment of the break first for the drum to came off...

Jun 09, 2009 | 2006 Ford Focus

2 Answers

How do you replace a cv axle?


Search for that on YouTube.com entering your cR info an cv axel

Mar 26, 2015 | 2001 Mitsubishi Diamante

1 Answer

How do i replace front end spindle on 1990 ford van


there is something wrong with what you describe The spindle /stub axle doesn't turn as it is stationary and the pad would only sit on the spindle
However the pad would sit on the hub or drive axle the rotor has bearings in the centre that sits on the spindle /stub axle and if the bearings were correctly adjusted there would be no damage to the axle.

However if the axle is damaged it may be bolted to the suspension arm or if it is a strut suspension the whole strut will have to be replaced. Get yourself a workshop manual as you have already spent too much money by not having one.

Jan 15, 2015 | 1990 Ford Econoline

1 Answer

Need pictures and procedure 91 Ford pickup F250 twin I beam ball joint replacement.


Wheel Spindle, F-150, F-250, F-350
Removal
  1. Raise the front of the vehicle and install safety stands.
  1. Remove the wheel and tire assembly. Refer to Section 04-04 .
  1. Remove the disc brake caliper (2B120) from the rotor and wire it out of the way. Refer to Section 06-03 .
  1. Remove the dust cap, cotter pin, nut retainer, nut, washer and front wheel bearing (1216).
  1. Remove the rotor from the front wheel spindle (3105).





    Item Part Number Description 1 606085 Clamp Bolt 2 3B404 Camber Adjuster 3 800895 Nut 4 800937 Nut 5 3049 Front Suspension Upper Ball Joint 6 3050 Front Suspension Lower Arm Ball Joint 7 3105 Front Wheel Spindle 8 642569 Cotter Pin 9 3304 Steering Sector Shaft Arm Drag Link 10 383489 Nut 11 3001 Front Axle Assembly 12 388727 Bolt A - Tighten to 77-103 Nm
    (57-75 Lb-Ft) B - Tighten to 68-92 Nm
    (50-67 Lb-Ft) C - Tighten to 113-153 Nm (83-112 Lb-Ft) D - Tighten to 340-460 Nm (250-339 Lb-Ft)
  1. Remove bearing cone and roller (1201) and wheel hub grease seal (1190). Discard the seal.
  1. Remove front disc brake rotor shield (2K004). Refer to Section 06-03 .
  1. Disconnect the steering linkage from the integral front wheel spindle and spindle arm by removing the cotter pin and nut and then removing the front wheel spindle tie rod from the spindle arm with Tie Rod End Remover TOOL-3290-D or equivalent.
  1. Remove the cotter pin and castellated nut from the lower ball joint stud.
  1. Remove the nut from the axle clamp bolt and remove the bolt from the axle.
  1. Remove the camber adjuster from the upper ball joint stud and axle beam. If required, use Ball Joint Removing Tool D81T-3010-B or equivalent to remove adjuster.
  1. stj~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Do not use a pickle fork to separate the ball joint from the axle as this will damage the seal and the ball joint socket.
    Strike the inside area of the axle as shown to pop lower ball joints loose from the axle beam.
  1. Remove the front wheel spindle and ball joint from the axle.






Ball Joint, F-150, F-250, F-350 SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number U-Joint Tool T74P-4635-C Ball Joint Remover T94T-3010-AH
Removal
  1. Remove the front wheel spindle (3105) and ball joint assembly from the axle. Refer to Wheel Spindle, F-150, F-250, F-350 in the Removal and Installation portion of this section.
  1. NOTE: Lower ball joint must be removed first.

    Install the front wheel spindle in a vise and remove the snap ring from the lower ball joint.
  1. Remove the lower ball joint from the front wheel spindle using U-Joint Tool T74P-4635-C and Receiver Cup D81T-3010-A5 or equivalent for F-150. Use Ball Joint Remover T94T-3010-AH for F-250 and F-350.
  1. Turn the forcing screw clockwise until the ball joint is removed from the front wheel spindle.
  2. CAUTION: Do not heat the ball joint or the front wheel spindle to aid in removal.
    Assemble U-joint tool and cup on the upper ball joint, and turn forcing screw clockwise until ball joint is removed from the front wheel spindle.


    Installation
    1. stj~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Do not heat the ball joint or axle to aid in installation.
      NOTE: Upper ball joint must be installed into the front wheel spindle first.

      NOTE: Individual ball joint tools are included in Ball Joint Adapter Set D81T-3010-A or equivalent.

      To install the upper ball joint, assemble C-frame assembly, Ball Joint Receiver Cup D81T-3010-A5 and Installation Cup D81T-3010-A1 and D81T-3010-A3 or equivalents inside cup D81T-3010-A4 or equivalent in position on the front wheel spindle.
    1. Turn forcing screw clockwise until ball joint is seated.



    2. snorkelbobby_49.gif

Mar 25, 2011 | Ford F-250 Cars & Trucks

1 Answer

Lower ball joint replace


take the net off the end off the axle shaft and seperate the spindle from the ball joind and the tierod end. now just push or tap the axle out of the spindle and use a pry bar to pop the axle haft out of the front dift. or unbolt from dift if thats your application.

Apr 05, 2010 | 2005 Ford Expedition

1 Answer

How to change front wheel bearings on 2002 ford focus zx5


these are pressed in wheel bearing assemblies. axles need to be removed out of the spindle and either a special tool to do it on the car needs to be used or the entire spindle removed and carefully pressed in and out. if you so choose to take this venture on i would suggest taking the spindle off by removing the brake caliper, rotor, axle nut, 2 bolts for the strut, lower ball joint, and tie rod. once this has been done and the pieces are in your hand take it to some place like napa or a local repair shop and pay them to do the press work.

Nov 03, 2009 | 2000 Ford Focus

1 Answer

2000 ford focus i need to know the part the runs axle to tire


spindle, is the part where the axle and your tire both bolt on,where your bearing is as well

May 10, 2009 | 2000 Ford Focus

1 Answer

Front axle u-joint


YOU will need to remove fornt hub/rotor assembly. this will reveal the spindle and 5 nuts holding it to the knuckle remove nuts slide off spindle and axle will then come out. then you can replace joint

Oct 17, 2008 | 1994 Ford F150 Styleside Supercab

Not finding what you are looking for?
2004 Ford Focus Logo

Related Topics:

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...