Question about 1997 Acura CL

1 Answer

97 acura CL ABS light goes on What are the potential fixes?

Posted by on

  • 1 more comment 
  • Anonymous Mar 16, 2014

    How do you fix the bolt on a 97 Acura cl

  • Anonymous Mar 16, 2014

    How do you fix the bolt and joints on a 97 Acura cl

  • Anonymous Mar 16, 2014

    How do you fix the bolt and joints on a 97 Acura cl

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Acura Master
  • 19,396 Answers

The ABS light can be on for different reason.
sometimes a bad speed sensor on one of the wheels can trigger the ABS light.
The ABS module, or the entire braking sytem may be faulty, to find out there is need to test the ECU/ABS modules usinga code reader, and to inspect the braking system.

Posted on Jul 01, 2009

  • chersky Sep 28, 2010

    This just happened with my 99 Acura Integra. The tests showed a bad speed sensor in the left rear wheel. It will cost $400 to replace it, with $180 of that being labor charges. This seems outrageous to me.

  • kalvin_rauma
    kalvin_rauma Sep 22, 2012

    I have an acura 2.2 cl 97. anyone know where I can find abs codes?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 Acura CL D4 light flashing


You change the transmission control molcule (TCM).

Jul 26, 2013 | 1997 Acura CL

1 Answer

D4 light


Either fit a manual gearbox or change the gearbox for a recon unit ,other than that trade it in on plan previa and get 2500E on it against a new car but this time buy a manual .You one has a clutch operating piston failed or a brake band worn out but what ?well without stripping the box who knows

Jul 26, 2013 | 1997 Acura CL

1 Answer

97 accura ABS light comes on after start up and will not turn off.


You might want to take your car to Autozone and have them perform a free scan to bring a code and give a starting point.

Apr 13, 2013 | 1997 Acura CL

1 Answer

1997 acura cl abs light is on


One of your wheel hubs/bearings are going bad. This is what your ABS sensor is tied into.

Jan 24, 2013 | 1997 Acura CL

1 Answer

Abs light on acura 2.3 cl 98. it goes on and off. I added some acura brakefluid, now light is off.


When you drive the brake pads wear down as a normal part of driving. When they get about half worn the amount of fluid in the master cylinder will be low because it takes more to fill the wheel cyliinders. Low brake fluid causes the light to come on. This is all normal.

Sep 18, 2010 | 1998 Acura CL

1 Answer

97 2.2 cl high idle, self rev, overheat, started same time


i cannot specifically point out what the problem might be, but an overheating car---never a good thing. check everything related to cooling. fans, radiator, hoses, waterpump, coolant overflow tank(see if its got a brownish color or looks like there is oil), and check your oil while your at it...

Jan 17, 2010 | 1997 Acura CL

1 Answer

97 Acura cl abs light on? What does this mean and how to fix


This indicates a problem with the anti-lock brake system, make sure fluid levels are correct, but it is likely that a sensor at one of the wheels has disconnected, causing the light to go on. If you have driven over road debris, snow, ice, etc. something may have damaged a sensor at one of the wheels. Jack up the car and support it to safely go underneath to inspect all 4 wheels at the back sides for damage.

Dec 18, 2009 | 1997 Acura CL

4 Answers

I replaced EGR valve on my 97 Acura 3.0 CL after


I am fixing to change my EGR valve and the piece of paper that came with the part say this:

Important Notice
Before installing this part, check the EGR valve passage in the intake manifold and clear any carbon blockage. Failure to do so will result in repeat malfuntion of the EGR valve system. Refer to a technical service manual or contact a service dealer for proper cleaning procedures.

Hope this helps.

Aug 02, 2009 | 1997 Acura CL

1 Answer

97 ACURA 3.O L STALLS ALL THE TIME


Could be the ignition switch, if the green key light is flashing then the issue is the switch. There was a recall issued for the ignition switch for this car back in 03 for the 97 to 99 Acura CL.

Jun 11, 2009 | 1998 Acura CL

2 Answers

Check engine light


yes and itys a very common problem yu need to change the speed sensor (VSS) on the trans heres how it comes apart 4359d1c.gif

Feb 21, 2009 | 1997 Acura CL

Not finding what you are looking for?
1997 Acura CL Logo

Related Topics:

2,047 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...