Question about 1993 GMC Sierra K1500

2 Answers


Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

It could be a number of things. First of all the above commen left is reffering to your axel berring being worn out if you jack up the truc and grab the tire top to bottom and side to side and there is play like it isn't tightened all the way then your bearings are worn on that side. I recently had to redo mine cause it felt like there was a boulder in my rotors when i turned on that tire and it also engaged my abs braking system causing a malfunction. My axel bearing cost upwards of 160.00 bucks a piece and i would suggest replacing both sides cause if ones already going then it is only a matter of time before the other side goes too. Next I would check the u-joint and check for play or it could possibly a broken motor mount or trans mount. Hope this helps

Posted on Jul 02, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 321 Answers

Ball joint some were.
lift the front of the car both front tires and push and pull on each one.pull front and bank and in and out.grip the bottom of the tire and lift up.

hope this helps

thank you

Posted on Jul 01, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 2002 GMC 2500hd with an 8.1 eng has two history codes p0101 and p0700. How do I fix it?

if it's in the transmission other than ck'ing to see if you have proper level and quality fluid level in trans theres not much a homeowner can do your gonna need to find a good trans shop
1st try getting a fluid flush and fill this is a lower cost fix that sometimes works and you don't need to remove trans to do it

Sep 16, 2014 | 2002 GMC Sierra 2500HD

2 Answers

Clunk when coming to a stop

That clunking noise you get it whilst you are braking or just as you are coming. If it is whilst on breaking,check your rear brakes. if is whilst coming check for any suspension shocks,bushes.

Aug 28, 2014 | 2002 GMC Sierra 2500HD

1 Answer

97 ford ranger 4wd 4.0. Been to a trans man and 3 garages and no one can figure this out. When shifting park to reverse I have a big thump in te rear end and the body of my truck scrunches down. Won't...

Does it do the same behavior when in 4WD LOW or 4WD High? If so, it's the transfer case or possible the front or rear differential.


Oct 30, 2013 | Cars & Trucks

1 Answer

1994 GMC Sierra Howling grinding on acceleration

Have you raised the back of the truck and had someone run the truck in place to verify the source of the noise ?

Feb 18, 2013 | 1994 GMC Sierra

2 Answers

My 2007 has a weird jolt whenever I come to a stop. Sometimes if I stop a little hard and I keep the brake pressed, once I let it go it feels like if someone rear ended me. What could be the problem?

I have the same thing happening with my Suburban. I have found that the motion that you feel is the rear brake shoes releasing from the brake drum. The shoes will stick until the vehicle drives foreward and this will cause the shoes to release. Check your brakes and service them but it may not eliminate the sysmptom. I hope this helps.

Mar 29, 2011 | 2007 Chevrolet Tahoe

1 Answer

Rear of vehicle feels as if it is slipping when taking off from stop. Vehicle has 37K miles

alot of gmc trucks have an automatic locking rear differential, take some time to get used to how they act

Mar 06, 2010 | 2007 GMC Yukon XL Denali

1 Answer

My truck makes a loud thump from the front on the passenger side.

Most likely you have worn out suspension parts. A front shock could cause the problem because the rubber bushing holding it in place may have dried up and fell out. Upper and lower A-arms have rubber bushings as well.
Best to have the front suspension checked out before it gets worse.

Oct 05, 2009 | 1990 Toyota Pickup

Not finding what you are looking for?

Open Questions:

See all 1993 GMC Sierra K1500 Questions

Cars & Trucks Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

75822 Answers


Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides