The AC functions of defrost, vent and floor are controlled by vacuum motors, you have a vacuum loss problem from the engine, check for a small disconnected vacuum hose under the hood from the engine to the firewall..
There are two places where the vacumn hoses come loose or off.
One is under the battery box ... small hose goes on nipple there.
Also when standing in front of the jeep. to the right side of the engine you will find a tee shaped hose that one of the hoses goes onto a nipple in that area.
The cruise control on my 02 Wrangler powers on, but when I attempt to set the speed, it powers right...
(More)
The cruise control on my 02 Wrangler powers on, but when I attempt to set the speed, it powers right back off and won't power on again till the engine is restarted. (all fuses are intact) Also, about the same time I began having this issue with the cruise, the cigarette lighter plug quit working. Are both items on the same circuit?
passanger seat will not go forward by tugging on the cloth piece. i have to push the latch in under...
(More)
passanger seat will not go forward by tugging on the cloth piece. i have to push the latch in under the seat. found the broken cable and found the cable guide. need to find out where both ends of cable connect to.
my seat on my 2002 wrangler will not go forward. found broken cable. need to know the 2 connecting...
(More)
my seat on my 2002 wrangler will not go forward. found broken cable. need to know the 2 connecting points and how to dismantle seat.
When I first crank my jeep engine speed jumps to 2000 rpm then slowly goes down to 1000. It does...
(More)
When I first crank my jeep engine speed jumps to 2000 rpm then slowly goes down to 1000. It does not matter if engine is warm or cold. Also my temp. control on my heater will not turn the heat all the way off. I have warm air blowing when set on vent and temp control turned all the way down. Could I be having a vacuum problem?